Bc2000 (for the BCF2000 & BCR2000)

HUH??? Send only preset?!?! How do I do that? I can only see 'send all data'.....

--- In bc2000@yahoogroups.com, "Mark v.d. Berg" <markwinvdb@...> wrote:
>
> --- In bc2000@yahoogroups.com, "diddywahdiddy1" <550@> wrote:
> >
> > I found something that may be of importance : when I send midi data the ID of the BCR is switched (I think by BC manager?) from 2 to 1.....
> > 
> > Is that in compliance with your observation?
> 
> Yes. That's exactly what I experienced myself this morning.
> So you should avoid this switch at any cost, as I indicated in my previous message.
> 
> By the way, this problem isn't limited to BC Manager:
> For instance the standard preset files from Behringer (such as bcr_FACTORY_PRESETS.syx) also contain Device IDs and Operating Modes, so if you send such a file to a BCR "directly" (e.g. via MIDI-OX), the BCR's Device ID and/or Operating Mode may change too.
> So sending a syx file containing BCR presets directly to a BCR is always dangerous: the file may or may not contain (potentially undesired) Global Setup data too.
> Therefore the safest approach is to open any syx file in BC Manager, then have BC Manager send only the presets, not the Global Setup.
> 
> Mark.
>