Could anyone explain step by step how to program the bcf2000 for the Matrix 1000 parameters. It will be much apreciatted.
A real IT dumb here!
Regards,
Gonzalo
On 16/11/2011 16:10, xarolium wrote:
Hi,
Try to check this page for sysex information about Matrix 1000
http://www.youngmonkey.ca/nose/audio_tech/synth/Oberheim-Matrix1000.html
for example if you want to control VCF freq you send
F0H 10H 06H 06H 15H 00H F7H
F0H --> beginning of Sysex
10H --> Oberheim sysex type
06H --> Matrix-6/6R/1000 Device ID
06H --> REMOTE PARAMETER
15H --> VCF frequency parameter ( 21 in DEC = 15 in HEX)
00H --> value of parameter
F7H --> End sysex
you can do that with all parameter
try to use this software to configure your BCR2000
http://f1.grp.yahoofs.com/v1/AN7DTvv0nGoCgYIDva78eYzxN_rWyubhdMjXD5L3sZHxml-gNWuo7U8BmRpDqVPMtLNKKd982VfpAzCpg3M3nfwdzvumYKU/Applications/bcfredit_V0.41.zip
You select "LEARNED" on the type knob selector and you put the right sysex you need under
Try it it's so easy
You have to right the sysex like this $F0 $10 $06 $06 $15 val $F7
hope it help you