Bc2000 (for the BCF2000 & BCR2000)

Xalorium!
Thanks for the instructions.
Very appreciated!! Working like a charm. Thanks!!
Gonzalo

--- In bc2000@yahoogroups.com, Gonzalo <djdiletante@...> wrote:
>
> Hello!
> Could anyone explain step by step how to program the bcf2000 for the 
> Matrix 1000 parameters. It will be much apreciatted.
> A real IT dumb here!
> Regards,
> Gonzalo
> 
> On 16/11/2011 16:10, xarolium wrote:
> >
> > Hi,
> >
> > Try to check this page for sysex information about Matrix 1000
> > http://www.youngmonkey.ca/nose/audio_tech/synth/Oberheim-Matrix1000.html
> >
> > for example if you want to control VCF freq you send
> >
> > F0H 10H 06H 06H 15H 00H F7H
> >
> > F0H --> beginning of Sysex
> > 10H --> Oberheim sysex type
> > 06H --> Matrix-6/6R/1000 Device ID
> > 06H --> REMOTE PARAMETER
> > 15H --> VCF frequency parameter ( 21 in DEC = 15 in HEX)
> > 00H --> value of parameter
> > F7H --> End sysex
> >
> > you can do that with all parameter
> >
> > try to use this software to configure your BCR2000
> > http://f1.grp.yahoofs.com/v1/AN7DTvv0nGoCgYIDva78eYzxN_rWyubhdMjXD5L3sZHxml-gNWuo7U8BmRpDqVPMtLNKKd982VfpAzCpg3M3nfwdzvumYKU/Applications/bcfredit_V0.41.zip
> >
> > You select "LEARNED" on the type knob selector and you put the right 
> > sysex you need under
> > Try it it's so easy
> > You have to right the sysex like this $F0 $10 $06 $06 $15 val $F7
> >
> > hope it help you
> >
> >
>