Bc2000 (for the BCF2000 & BCR2000)

At this point I would record some automation into cubase. Then check all the midi settings are correct in cubase and try and get that automation out to the mks. It sounds to me like the problem is between Cubase and the mks. Sorry to hear this is taking so long to solve. 

Kieran

Sent from my iPhone

On Feb 15, 2012, at 12:18 AM, "peterobrian@..." <peterobrian@ymail.com> wrote:

> Last news,
> 
> i have reinstalled the usb midi driver and now instead the bcr2000 port 1/2/3 i have just 1 port called BCR2000 , so i have configured bc manager with this port but still no comm with the mks.
> 
> when monitoring with the midi input meter i see activity when movin encoders and the correct sysex strings in the midi input messages :(
> 
> the mks has sysex receive enabled since i have uploaded sysex files to it before...
> 
> --- In bc2000@yahoogroups.com, "peterobrian@..." <peterobrian@...> wrote:
> >
> > Hello yatlabatla, i guess you are using a mks50 software editor and the bcr, and you have midi learnt every parameter of the editor to map to the bcr, thats a solution but its not what im looking for, thanks :)
> > 
> > Kind Regards,
> > 
> > J
> > 
> > --- In bc2000@...m, bammusic@ wrote:
> > >
> > > hi, not that it is any help but i have an mks 50 hooked up and it
> > > seems to follow sys ex info from my bcr fine..so get help from the
> > > techo guys here and i am sure you will be on your way..soon..The way i
> > > did it from memory was teaching the bcr each parameter i wanted to
> > > change though..
> > > good luck BAÂ 
> > > 
> > > ----- Original Message -----
> > > From: bc2000@yahoogroups.com
> > > To:
> > > Cc:
> > > Sent:Tue, 14 Feb 2012 17:38:05 -0000
> > > Subject:[bc2000] Re: newbie
> > > 
> > > Â  
> > > 
> > > Hello Mark, thanks for the quick reply
> > > 
> > > yes, it seems that the enconders work in the right way, i.e. the
> > > first encoder in the upper row has a value of 0 to 3, the second 0 to
> > > 3, the fourth 0 to 5 the fifth 0-127... and when i move them i can
> > > see the leds and the value change in the bcr display, definitely it
> > > seems that is working ok but the mks doesnt do anything... (i.e. the
> > > first encoder is the dco range so i should hear a change in the sound)
> > > 
> > > Regards,
> > > J
> > > 
> > > --- In bc2000@yahoogroups.com [1], "Mark v.d. Berg" wrote:
> > > >
> > > > --- In bc2000@yahoogroups.com [2], "peterobrian@" wrote:
> > > > > then go to presets and import my mks50 sysex file, OK, i can see
> > > the preset, then i go to midi/send and the bcr200 start to blick, it
> > > seems that the presets has loaded ok in the bcr hardware....
> > > > > but now when i move encoders on the bcr the mks doesnt do
> > > anything.... if anyone could tell me what im missing or if im doing
> > > something wrong... thanks in advance...im getting a bit mad :)
> > > > 
> > > > When you move the encoders, do these encoders (and the BCR's
> > > display) respond as intended?
> > > > You should realize that when moving the encoders you're always
> > > working with the BCR's "temporary" preset (a.k.a. "preset 0").
> > > > See questions 43-45 (pp. 94-95) in the FAQ section of BC Manager
> > > Manual.
> > > > 
> > > > Hope this helps,
> > > > Mark.
> > > >
> > > 
> > > 
> > > 
> > > Links:
> > > ------
> > > [1] mailto:bc2000%40yahoogroups.com
> > > [2] mailto:bc2000%40yahoogroups.com
> > > [3] mailto:peterobrian@ymailcom?subject=Re%3A%20newbie
> > > [4] mailto:bc2000@yahoogroups.com?subject=Re%3A%20newbie
> > > [5]
> > > http://groups.yahoo.com/group/bc2000/post;_ylc=X3oDMTJxbWZrbzhyBF9TAzk3MzU5NzE0BGdycElkAzEzMTY3MjczBGdycHNwSWQDMTcwNzcwOTg2NARtc2dJZAMzNzk2BHNlYwNmdHIEc2xrA3JwbHkEc3RpbWUDMTMyOTI0MTA4Nw--?act=reply&messageNum=3796
> > > [6]
> > > http://groups.yahoo.com/group/bc2000/post;_ylc=X3oDMTJmZXA2cG0yBF9TAzk3MzU5NzE0BGdycElkAzEzMTY3MjczBGdycHNwSWQDMTcwNzcwOTg2NARzZWMDZnRyBHNsawNudHBjBHN0aW1lAzEzMjkyNDEwODc-
> > > [7]
> > > http://groups.yahoo.com/group/bc2000/message/3160;_ylc=X3oDMTM1amJ0aTg3BF9TAzk3MzU5NzE0BGdycElkAzEzMTY3MjczBGdycHNwSWQDMTcwNzcwOTg2NARtc2dJZAMzNzk2BHNlYwNmdHIEc2xrA3Z0cGMEc3RpbWUDMTMyOTI0MTA4NwR0cGNJZAMzMTYw
> > > [8]
> > > http://groups.yahoo.com/group/bc2000/members;_ylc=X3oDMTJndmJpNnRkBF9TAzk3MzU5NzE0BGdycElkAzEzMTY3MjczBGdycHNwSWQDMTcwNzcwOTg2NARzZWMDdnRsBHNsawN2bWJycwRzdGltZQMxMzI5MjQxMDg3?o=6
> > > [9]
> > > http://groups.yahoo.com/group/bc2000;_ylc=X3oDMTJmdWJoMzI5BF9TAzk3MzU5NzE0BGdycElkAzEzMTY3MjczBGdycHNwSWQDMTcwNzcwOTg2NARzZWMDdnRsBHNsawN2Z2hwBHN0aW1lAzEzMjkyNDEwODc-
> > > [10]
> > > http://groups.yahoo.com/;_ylc=X3oDMTJldjRrdDRrBF9TAzk3MzU5NzE0BGdycElkAzEzMTY3MjczBGdycHNwSWQDMTcwNzcwOTg2NARzZWMDZnRyBHNsawNnZnAEc3RpbWUDMTMyOTI0MTA4Nw--
> > > [11]
> > > mailto:bc2000-traditional@yahoogroups.com?subject=Change%20Delivery%20Format:%20Traditional
> > > [12]
> > > mailto:bc2000-digest@yahoogroups.com?subject=Email%20Delivery:%20Digest
> > > [13] mailto:bc2000-unsubscribe@yahoogroups.com?subject=Unsubscribe
> > > [14] http://docs.yahoo.com/info/terms/
> > >
> >
> 
>