Bc2000 (for the BCF2000 & BCR2000)

Hey Mark!

that works! so i load the preset into bcr then i change to s-1 mode and thats it, i move the encoders and mks responds just right :)

thanks for your help,

J

--- In bc2000@yahoogroups.com, "Mark v.d. Berg" <markwinvdb@...> wrote:
>
> To send the BCR's messages to the MKS at MIDI OUT A, there are 2 setups you could use:
> 
> 1. Put the BCR in an S-mode (1/2/3/4).
> However, the USB connection doesn't work in this case, so you can't use Cubase or BC Manager to talk to the BCR or MKS (at least not via USB).
> 
> Hope this helps,
> Mark.
>