Bc2000 (for the BCF2000 & BCR2000)

Www.aviefresh.com

On Feb 15, 2012, at 8:09 AM, "peterobrian@..." <peterobrian@...> wrote:

> And thanks to all that helped too, now that i know how to interconnect the bcr with my hardware synths, im going to make (or at least try) an oberheim matrix 1000 preset, if can get it to work ill upload
> 
> Best Regards,
> 
> J
> 
> --- In bc2000@yahoogroups.com, "peterobrian@..." <peterobrian@...> wrote:
> >
> > Hey Mark!
> > 
> > that works! so i load the preset into bcr then i change to s-1 mode and thats it, i move the encoders and mks responds just right :)
> > 
> > thanks for your help,
> > 
> > J
> > 
> > --- In bc2000@yahoogroups.com, "Mark v.d. Berg" <markwinvdb@> wrote:
> > >
> > > To send the BCR's messages to the MKS at MIDI OUT A, there are 2 setups you could use:
> > > 
> > > 1. Put the BCR in an S-mode (1/2/3/4).
> > > However, the USB connection doesn't work in this case, so you can't use Cubase or BC Manager to talk to the BCR or MKS (at least not via USB).
> > > 
> > > Hope this helps,
> > > Mark.
> > >
> >
> 
>