Bc2000 (for the BCF2000 & BCR2000)

i think it worked, i sent the file to the email from your website, please let me know if it looks correct so i can update my firmware. thanks for all your help!

--- In bc2000@yahoogroups.com, "Mark v.d. Berg" <markwinvdb@...> wrote:
>
> --- In bc2000@yahoogroups.com, "patrick_koondial" <patrick_koondial@> wrote:
> > with another usb port it says "usb audio device"...) under both tabs
> 
> In addition to my previous reply:
> 
> Under Windows, a USB device driver usually ONLY gets installed for the USB port to which the device is currently connected.
> 
> Both Windows' standard "USB Audio Device" driver and Behringer's USB device drivers (e.g. 1.2.1.3) work this way.
> 
> So it's quite natural that you see "USB Audio Device" when you plug the BCR into a USB port for which you haven't installed the Behringer driver (yet).
> 
> So I always try to plug each USB device (BCF, BCR etc.) into the same USB port, to avoid having to install its device driver multiple times.
> 
> Mark.
>