Bc2000 (for the BCF2000 & BCR2000)

sorry one last question, ive checked the board and the manual, i may be missing it or doing something wrong: i want to change the midi channels for particular presets, i have the mks50 on preset 1 and tx81z on preset 2. mks50 is going through channel 1 which is fine but the tx81z defaults to channel 11. i tried in the presets window to go to edit->set->channel and set the specific channel and sent to bcr but its stays at channel 11. is this the correct method?

--- In bc2000@yahoogroups.com, "Mark v.d. Berg" <markwinvdb@...> wrote:
>
> --- In bc2000@yahoogroups.com, "patrick_koondial" <patrick_koondial@> wrote:
> > i think it worked, i sent the file to the email from your website, please let me know if it looks correct so i can update my firmware.
> 
> Yes, I got it!
> And... it's OK!
> After some necessary conversions I managed to upload the 1.03 firmware to my own BCR (which had 1.10), using BC Manager's "Send firmware" routine.
> Then when I restarted the BCR it said "1.03".
> (So at that point I was in exactly the same position as you.)
> Then I used BC Manager's "Send firmware" routine again, this time uploading the 1.10 firmware - and after restarting the BCR it was back to 1.10 again.
> So this should work for you as well.
> 
> One very important point: the 1.03 firmware file you sent me is unsuitable for uploading to the BCR:
> For reasons only known to the developer of the BCR2000 at Behringer, there is a mismatch between the firmware format that is to be sent TO the BCR and the format that the BCR returns.
> So to avoid confusion, I suggest you simply destroy that file.
> If you wish, I could send you the "corrected" version of 1.03 (which CAN be sent to the BCR) - but I suppose you'll just be happy to see the back of 1.03...
> 
> In any case I now know that 1.03 can be upgraded simply using BC Manager's existing "Send firmware" routine, which is useful if any other old BCFs/BCRs turn up.
> 
> So thanks very much for your patience. I'll mention you in my will...
> 
> Let me know if there's any problem with uploading 1.10.
> 
> Good luck!
> Mark.
>