Bc2000 (for the BCF2000 & BCR2000)

--- In bc2000@yahoogroups.com, karel skakal <s_y_nagual@...> wrote:
> Thanks Mark, I send you the MIDI file.

I've looked at the file in BC Manager:
I can't see anything wrong: all the buttons and encoders define different Control Change messages (i.e. different channel and/or controller); this goes for both preset 0 and preset 9.

I've uploaded the whole file to my own BCR2000, and I can't see any buttons triggering other buttons. (Well, maybe I could see "ghost" LEDS in a darkened room, but that's not what you're experiencing, apparently...)

So I'm starting to think that your BCR does have a hardware problem.
It's either a VERY bad case of the "familiar" problem with ghost LEDs, or something more serious.

Just an idea: you might try BC Manager's "Test hardware" mode (from the B-Controls window: MIDI -> Maintenance): while the BCR is in this mode, pressing any button should switch all the other buttons on or off too; I'm not sure what happens in your case.

Mark.