Bc2000 (for the BCF2000 & BCR2000)

Hi Mike
Good idea. It will work with encoders (using easypar) 
Pity to use an encoder for 6 values though.

It is sad that the incrementing button doesn't work the same as the encoder with easypar values.
My guess is that it was implemented differently when they added button increment, which was was an addition in the last firmware. 

All the best
Royce

--- In bc2000@yahoogroups.com, Mike Perkowitz <perkowitz@...> wrote:
>
> Not ideal, but I'd try setting two knobs to the same CC, one with the range
> 0-36 and one for 101-106. then if you want the lower set, you use the first
> knob, and the second set the second knob. it seems like that should work.
> 
> mike
> 
> 
> On Sun, Sep 23, 2012 at 1:14 AM, - <k5kip_1999@...> wrote:
> 
> > **
> >
> >
> > Hey all,
> > I am making a preset to control Line 6 PodXt Live foot pedal.
> > It only uses cc's so nothing too fancy.
> > However, line 6 has decided for some reason to have amp models located on
> > CC#12 values 0-36 then again at 101-106.
> >
> >
>