Bc2000 (for the BCF2000 & BCR2000)

Thanks for the thoughts 
Two knobs - or a knob and a button. Makes sense - will try 
I think they did to leave room for $ amp models. Extra $100 gets more stuff. 


--- In bc2000@yahoogroups.com, "Royce" <rpcfender@...> wrote:
>
> Hi Mike
> Good idea. It will work with encoders (using easypar) 
> Pity to use an encoder for 6 values though.
> 
> It is sad that the incrementing button doesn't work the same as the encoder with easypar values.
> My guess is that it was implemented differently when they added button increment, which was was an addition in the last firmware. 
> 
> All the best
> Royce
> 
> --- In bc2000@yahoogroups.com, Mike Perkowitz <perkowitz@> wrote:
> >
> > Not ideal, but I'd try setting two knobs to the same CC, one with the range
> > 0-36 and one for 101-106. then if you want the lower set, you use the first
> > knob, and the second set the second knob. it seems like that should work.
> > 
> > mike
> > 
> > 
> > On Sun, Sep 23, 2012 at 1:14 AM, - <k5kip_1999@> wrote:
> > 
> > > **
> > >
> > >
> > > Hey all,
> > > I am making a preset to control Line 6 PodXt Live foot pedal.
> > > It only uses cc's so nothing too fancy.
> > > However, line 6 has decided for some reason to have amp models located on
> > > CC#12 values 0-36 then again at 101-106.
> > >
> > >
> >
>