Bc2000 (for the BCF2000 & BCR2000)

--- In bc2000@yahoogroups.com, dave watkinson <dave422x@...> wrote:
> Well, your test WORKED!!

Amazing! I didn't think it would work, but rereading your posts it struck me that all the BCR's MIDI I/O LEDs still seemed to work, and it seemed a bit unlikely that these LEDs would "lie".

> Still nothing in the computer though. I have tried the auto-MIDI-input detection in both REAPER and eDrum MIDI Mapper and neither seems to be receiving anything.

One (not necessairly good...) piece of advice:
if I were you, I would leave Reaper and the BCR out of the equation until I've established working MIDI input and output ports (i.e. device drivers) for the MIDI interface(s).
I would test these I/O ports by MIDI Tools.
Maybe you can set up a loop from an interface's output to its input by means of your MIDI cable, just like you've done with the BCR: then you can send something from MIDI Tools (e.g. note or control messages) and see if these messages come back to MIDI Tools.

Hope this helps,
Mark.