Bc2000 (for the BCF2000 & BCR2000)

Thank you very much for your help.

Tks to you, I'v understood how to add this velocity parameter. It's not working, but I think there's parameters I don't have for this console... the correct velocity reference to all faders is unknown... even in the manual.

So, i'll continue to search for it.
Tks again.

G.

 
--- In bc2000@yahoogroups.com, "Royce" <rpcfender@...> wrote:
>
> Hi
> I'm a bit lost on the messages you want to send.
> 
> Do you need to select the fader with a Note on message with the velocity being the fader number then send a CC64 message on channel 1? 
> 
> Fader 3 set to 100
> $90 xx 3       ;xx is the global note number
> $B0 64 100 
> 
> Assuming this is correct, to send multiple messages like this you should use something like the following...
> 
> encoder 33 is for fader 1 ie velocity =1(?) or should it be 0 
> global note = 60 
> 
>  $encoder 33
>  .showvalue on
>  .mode 1dot
>  .minmax 0 127
>  .resolution 96 96 96 96
>  .tx $90 60 01
>  .tx $B0 64 val
> 
> You can use my editor in the files section or Mark's editor from his web site to convert this text file (we use the *.bc2 file extension) to sysex and send it to the BC.
> 
> 
> All the best
> Royce
> 
> --- In bc2000@yahoogroups.com, "greg_zeubest" <greg_zeubest@> wrote:
> >
> > Hi, :)
> > 
> > I'm trying to use a bcr to control a wholehog2 console. I used the "learn" function, and it seems ok for the buttons, but I can't use it for faders.
> > I can make a fader work, but they are all working together, as there's a missing parameter : velocity.
> > For this console, we can set faders only to one global note, CC will change the value of the fader, and velocity will choose a specific fader.
> > I've been searching on the net, but bcedit.jar doesn't seem to handle velocity, and perhaps BC manager can do it, but i don't know how, and I haven't found in the manual.
> > 
> > I Wonder if it's possible to modify a text version of the sysex to add it ?
> > 
> > $encoder 33
> > .easypar CC 1 64 0 127 absolute
> > .showvalue on
> > .mode 1dot
> > 
> > So, can you please help ? 
> > 
> > Thank you.
> >
>