Bc2000 (for the BCF2000 & BCR2000)

--- In bc2000@yahoogroups.com, "franq87" <franq87@...> wrote:
> I'm having problems with my bcr2000 to set it in mackie emulation mode. As the manual says, to put in mackie mode I have to set the bcr in u-1 mode and the turn off the controller and press one of the four buttons at the bottom of the first rows of the encoders.

> Well, I made this, but it never sets in mackie mode, but if I press the first one, on the screen of the bcr appears Bc, so the normal behringer controller mode works... why not the others mode?

Because the BCR2000 doesn't HAVE Mackie emulation modes: only the BCF2000 does.

But you're right that the BCR says "bC" when you keep the first button pressed while powering on, which is curious, given that it has no other modes.

Mark.