Bc2000 (for the BCF2000 & BCR2000)

--- In bc2000@yahoogroups.com, "brian_chinetti" <brian@...> wrote:
> I'm on OSX 10.8 but I have BC manager installed with Bootcamp running Windows 7. I downloaded BCR presets for the DW8000, the Alpha Juno, Kawai K1 and the JX8p. But if I load one sysex preset, another gets overwritten unless I copy the already present preset to another location. I'd like to know, can you determine beforehand to what location the preset loads?

I'm not quite sure what procedure you're following, but to understand what's going on, it might help to look at the FAQ section of the BC Manager manual: questions 11, (27,) 28, 35, (39,) (43,) and (the final part of) 45.

> I've been using a DW8000 preset to test with my sequencer and am faced with another problem. When I connect the BCR directly to the DW8000 everything works fine. But when I connect the midi out of the BCR to the midi in of my midi card, I can not edit the DW8000. Yet, when I connect a midi keyboard to that same port 8, I can play the DW8000. I can't imagine this is normal, so am I overlooking something? 

Hard to say based on this information, but have you set the BCR's Operating Mode (S/U-1/2/3/4) correctly?

Hope this helps,
Mark.