Bc2000 (for the BCF2000 & BCR2000)

Sorry for the delay. Thanks Royce for answering my question. I am still not quite “getting” the programming of the on off switch and it’s relation to the Value Settings.  I have my Transport “Play” set to CC value 0 and “stop” to cc value 7. That is working fine but my confusion is in getting the Toggle on to work so that if I press play once, it plays, Press again and Transport stops. This would be useful with the footswitch. My confusion is how to set the CC (Parameter) and the two value settings, encoder 3 and 5.  btw my recording history goes back to 1969 recording in London on those Ampex Reel to Reels and everything in between, hee hee :) 

 

From: bc2000@yahoogroups.com [mailto:bc2000@yahoogroups.com] 
Sent: Monday, February 02, 2015 3:23 PM
To: bc2000@yahoogroups.com
Subject: [bc2000] Re: trying a programme the Toggle On

 

  

If you are setting it from the BCF encoder 6 set the ToggleOn ToggleOff and Increment functions.

 

You need to turn the Toggle property on so set it to ToggleOn.

 

Hope this helps.

Royce