Bc2000 (for the BCF2000 & BCR2000) group photo

Yahoo Groups archive

Bc2000 (for the BCF2000 & BCR2000)

Index last updated: 2026-04-28 23:16 UTC

Message

BCR-2000 not receiving knobs and buttons positions from synths

2015-07-11 by plavigna@...

Hi, I am a new BCR-2000 user. I will be using to control my Korg DW-8000 and my Roland JD-990. I have no issue controlling parameters in both of my synths. But when I change a patch from the synth, the location of each parameter is not being loaded in the BCR-2000. I do have the midi out of the synth going to the midi in of the BCR and they are using the same midi channel. I do not know if there is any setting in the BCR-2000 that will take care of this issue.
Thanks in advance.


Attachments

  • No local attachments were found for this message.

Move to quarantaine

This moves the raw source file on disk only. The archive index is not changed automatically, so you still need to run a manual refresh afterward.