So I just got my BCR2000, and I'm already having issues getting it
to work with the TG. So with Jon's SYM, it seems to be working fine: I connect
it via USB, set it as the SYM MIDI In and Outputs, open up the BCR
Editor, and send a template to the BCR (the lights on the BCR start
swirling and then stop). However, when it comes to the TG itself, I'm
completely lost. Neither machine shows any indication of sending (BCR)
or receiving (TG) MIDI data when I move any of the knobs--even when I'm
on the page that I think is appropriate (being on the Op. 1 EG screen
where I believe that's where the template wants me to be).
To
test, I tried having the TG send MIDI data to the BCR with the learn
function. When I plug the TG MIDI Out into the BCR's MIDI In, the BCR's
MIDI In indicator is constantly beeping green. When I try having the BCR
learn a parameter from the TG, nothing is happening...the manual says I
should receive a message on the BCR that says either "good" or "bad",
which I don't see...the constant beeping leads me to believe the TG is
sending data non-stop, which I don't think is supposed to happen, but I
just don't know.
So,
with both sending and receiving on both ends not working, I'm led to
believe I'm having a problem interfacing my BCR and TG. It looks like I
have everything correct, though... MIDI settings on TG are:
Voice Receive Ch: omni
Note on/off: all
Device Number: 1
Bulk Protect: on
I tried experimenting with several of those (such as turning bulk protect off), but that did not change anything.
I would appreciate any help I can get!
I would appreciate any help I can get!