Bc2000 (for the BCF2000 & BCR2000) group photo

Yahoo Groups archive

Bc2000 (for the BCF2000 & BCR2000)

Index last updated: 2026-04-28 23:16 UTC

Message

usb port repair?

2016-03-11 by tr0x81@...

Hi, I bought a BCR2000 knowing that the usb port connection won't work (midi connection is good however), but I wonder if I can restore usb functionality in some way.
If I accidentally touch the chassis with the ground of the usb connector it makes some little sparks.
I checked with a VOM and found that there are about 1.5 AC volts between the chassis and the ground on the usb connector... is this normal?
Opening the unit I noticed that there's a solder joint between pads instead of where it should be and inductor (L4? unknown value).
Are yours boards the same as mine, with this solder blob?



Thank you!

Attachments

  • No local attachments were found for this message.

Move to quarantaine

This moves the raw source file on disk only. The archive index is not changed automatically, so you still need to run a manual refresh afterward.