Bc2000 (for the BCF2000 & BCR2000)

That got it! I don't remember reading about that...now if I can just figure out how to remember what knob controls what parameter....

On Tuesday, March 8, 2016 8:56 AM, "Smiley smilesmedia@... [bc2000]" <bc2000@yahoogroups.com> wrote:

please be sure to post if this solves your issue, i for one manually removed 85% of my hair trying to figure this out.

when on "P-1" press EDIT, hold, and press STORE.

display will say EG.

turn knob labeled TYPE to switch between the 4 U (USB) modes and the 4 S modes, i use mode 1 typically.

then press EXIT.

On Tue, Mar 8, 2016 at 9:40 AM, Clark Harrell harrellclark@... [bc2000] <bc2000@yahoogroups.com> wrote:

This is where it becomes apparent I9;m a new user: I saw the S modes in the manual, but I didn't think I needed to toggle them or anything manually...is there a button combination or switch I should know about?

Sent from my Verizon Wireless 4G LTE smartphone

-------- Original message --------

From: "Smiley smilesmedia@... [bc2000]" <bc2000@yahoogroups.com>

Date: 3/8/2016 4:31 AM (GMT-08:00)

To: bc2000@yahoogroups.com

Subject: Re: [bc2000] Need Help Interfacing TG77 with BCR2000

​can you confirm that you are in one of the "s" modes 1-4 on the BCR while trying to send midi to the TG?​

On Tue, Mar 8, 2016 at 1:37 AM, harrellclark@... [bc2000] <bc2000@yahoogroups.com> wrote:

So I just got my BCR2000, and I'm already having issues getting it to work with the TG. So with Jon's SYM, it seems to be working fine: I connect it via USB, set it as the SYM MIDI In and Outputs, open up the BCR Editor, and send a template to the BCR (the lights on the BCR start swirling and then stop). However, when it comes to the TG itself, I9;m completely lost. Neither machine shows any indication of sending (BCR) or receiving (TG) MIDI data when I move any of the knobs--even when I';m on the page that I think is appropriate (being on the Op. 1 EG screen where I believe that's where the template wants me to be).

To test, I tried having the TG send MIDI data to the BCR with the learn function. When I plug the TG MIDI Out into the BCR's MIDI In, the BCR's MIDI In indicator is constantly beeping green. When I try having the BCR learn a parameter from the TG, nothing is happening...the manual says I should receive a message on the BCR that says either "good" or "bad", which I don't see...the constant beeping leads me to believe the TG is sending data non-stop, which I don't think is supposed to happen, but I just don't know.

So, with both sending and receiving on both ends not working, I'm led to believe I'm having a problem interfacing my BCR and TG. It looks like I have everything correct, though... MIDI settings on TG are:

Voice Receive Ch: omni

Note on/off: all

Device Number: 1

Bulk Protect: on

I tried experimenting with several of those (such as turning bulk protect off), but that did not change anything.

I would appreciate any help I can get!

--

--