Bc2000 (for the BCF2000 & BCR2000) group photo

Yahoo Groups archive

Bc2000 (for the BCF2000 & BCR2000)

Index last updated: 2026-04-28 23:16 UTC

Message

Re: [bc2000] Hmm... newbie here, can't get MIDI out

2018-06-09 by rpcfender@...

When two or more encoders' LEDs move in sync it means that they are programmed for the same Midi message.
That is, if you programmed all the top row encoders to be CC7 on channel 3 then you will get this effect.
It is because of the excellent part of the BCR that allows for external control (ie change Live on the PC and the BC keeps in sync).

To stop it, just reprogram the encoders to a different Midi message (eg CC type or channel)

Glad you sorted it out.

Feel free to pop over to Mark's forum as I am ( and I suspect Mark is ) not here very often.
https://mountainutilities.eu/forum

All the best
Royce

Attachments

  • No local attachments were found for this message.

Move to quarantaine

This moves the raw source file on disk only. The archive index is not changed automatically, so you still need to run a manual refresh afterward.