Bc2000 (for the BCF2000 & BCR2000)

Without knowing much about your situation, I'd suspect that you're 
sending MIDI messages to the foot controller input rather than DC 
voltages.

You might want to go directly into your computer with your Roland 
data, or use the MIDI thru on the BCF.

Maybe Royce can help you more with this.

Art Hunkins

--- In bc2000@yahoogroups.com, "mhanderson48" <mhanderson48@...> 
wrote:
>
> --- In bc2000@yahoogroups.com, "abhunkin" <abhunkin@> wrote:
> >
> > I've a BCF; unfortunately, not a proper pedal to work the foot 
> > controller. However, I was able to apply primitive DC voltages, 
and 
> > to see that the control indeed operates as a fader, like the 
other 8 
> > faders.
> > 
> > Actually, it is programmable identically to the other faders (as 
is 
> > also indicated by Behringer's B-control editor) - and so is 
amenable 
> > to sending all sorts of messages.
> > 
> > I've no idea what a recommended foot controller voltage range 
might 
> > be.
> > 
> > Art Hunkins
> > 
> 
> Hmm, what I have here Art is a Roland MIDI foot pedal, and plugged
> into the BCF controller jack it causes value changes in the LED
> display when I rock the pedal. Intersting, but as I say, no luck
> getting a VST effect (wah effect is my example as it's what I most
> want to use it for) to respond. I'm on it though...
>