Bc2000 (for the BCF2000 & BCR2000)

Thanks, I found the problem. The problem was with Birdies BCFRedit, it
wouldn't upload the SysEx properly. When I tried sending it using
"Sysex Loader.exe", it immediately worked OK. 

Is there a list of all the different things you can use in the script
and what they do? I've been reading the "Behringer's Secret?" PDF from
this yahoo groups files page which is good info but it's not the full
list of all the available commands I'm after if it's available.

Regards,
-Ryan

--- In bc2000@yahoogroups.com, "rpcfender" <rpcfender@...> wrote:
>
> Hi Ryan
> 
> It turns out it didn't work fully, I got the system buttons working OK,
> sending CCs, but the preset keys don't send a CC at all.
> 
> Here's the main part of my preset, not including the other encoders &
> buttons:
> 
> This works fine for me. The buttons put on channel 3 CC $71 or $72 with
> a 'down' value of $7f and a release of 0
> Check that you haven't redefined them lather in the preset. The BCR is
> happy to redefine the button over and over again in the one preset. This
> usually happens when you cut and paste and forget to change the button
> number.
> 
> You could try just this snippet and if it works how you want it to then
> it will definitely be  a redefinition.
> You haven't defined $preset after  the buttons. The .init will clear
> your settings.
> Again the BCR is happy to have any number of $preset sections and it
> will clear everything that has gone before.
> 
> Other than that, it looks good.
> 
> $rev R1
> $preset
> .name 'TRAKTOR (P2)            '
> .snapshot off
> .request off
> .egroups 4
> .fkeys off
> .lock on
> .init
> $button 63
> .easypar CC 3 113 127 0 toggleoff
> .showvalue on
> $button 64
> .easypar CC 3 114 127 0 toggleoff
> .showvalue on
> $end
> 
> All the best
> 
> Royec
>