Bc2000 (for the BCF2000 & BCR2000)

Let's see if we can get closer to the problem.

What is your software version?
Have you tried the MIDI in port?
Swap your MIDI cables to see if one of them is the problem.
When you say it comes and goes, what changes - ? BCR reboot/power off ? 
PC reboot? Hot days? BCR on for a long time?
When it doesn't accept a preset will it change an encoder display with
MIDI in CC ?

Is the preset being sent by my editor ?
Does the preset start with $rev F1  ? (this is for the BCF)



--- In bc2000@yahoogroups.com, "k0mp0" <k0mp0ser@...> wrote:
>
> Hi rpcfender,
>
> I've tried it on all four of the USB modes, none of them make a
> difference!
>
> Regards,
> - k0mp0
>
>
> --- In bc2000@yahoogroups.com, "rpcfender" rpcfender@ wrote:
> >
> > Hi kOmpO
> >
> > What is your global MIDI setting?
> > U-1 to U-4, S-1 to S-4
> >
> > Hold 'Edit' , press 'Store'
> > Twist encoder 1  (top left) gently or you'll change it to something
> else.
> >
> >
> > > I'm having problems sending presets to my BCR2000. It's a problem
I've
> > > had for a long time that comes and goes. The problem is that it
just
> > > doesn't accept incoming presets at all, but other functions work
> fine.
> > >
> > > It doesn't display the usual circling line display when presets
are
> > > being receiving to the unit.
> > >
> > > Does anyone have any experience with this kind of behaviour or am
I
> > > all on my own here!?
> > >
> > > I'm using the latest driver - v1.2.1.3, and the latest firmware -
> > > 1.10, on both units and I usually use Birdies BCFRedit 0.41 but
I've
> > > tried other tools like MIDI-OX and Bome's Send-SX, but nothing
gets
> > > through.
> > >
> > >
> > > Any help would be really appreciated.
> > >
> > > Thanks,
> > > -k0mp0
> > >
> >
>