Bc2000 (for the BCF2000 & BCR2000)

Suggestion:
*Use Royce's editor.* And his help files. They work well and have 
pretty much all the info you need. This is the first download in the 
Files area (be sure to load the separate .zip help files as well).

Art Hunkins

--- In bc2000@yahoogroups.com, "k0mp0" <k0mp0ser@...> wrote:
>
> Thanks, I found the problem. The problem was with Birdies BCFRedit, 
it
> wouldn't upload the SysEx properly. When I tried sending it using
> "Sysex Loader.exe", it immediately worked OK. 
> 
> Is there a list of all the different things you can use in the 
script
> and what they do? I've been reading the "Behringer's Secret?" PDF 
from
> this yahoo groups files page which is good info but it's not the 
full
> list of all the available commands I'm after if it's available.
> 
> Regards,
> -Ryan
> 
> --- In bc2000@yahoogroups.com, "rpcfender" <rpcfender@> wrote:
> >
> > Hi Ryan
> > 
> > It turns out it didn't work fully, I got the system buttons 
working OK,
> > sending CCs, but the preset keys don't send a CC at all.
> > 
> > Here's the main part of my preset, not including the other 
encoders &
> > buttons:
> > 
> > This works fine for me. The buttons put on channel 3 CC $71 or 
$72 with
> > a 'down' value of $7f and a release of 0
> > Check that you haven't redefined them lather in the preset. The 
BCR is
> > happy to redefine the button over and over again in the one 
preset. This
> > usually happens when you cut and paste and forget to change the 
button
> > number.
> > 
> > You could try just this snippet and if it works how you want it 
to then
> > it will definitely be  a redefinition.
> > You haven't defined $preset after  the buttons. The .init will 
clear
> > your settings.
> > Again the BCR is happy to have any number of $preset sections and 
it
> > will clear everything that has gone before.
> > 
> > Other than that, it looks good.
> > 
> > $rev R1
> > $preset
> > .name 'TRAKTOR (P2)            '
> > .snapshot off
> > .request off
> > .egroups 4
> > .fkeys off
> > .lock on
> > .init
> > $button 63
> > .easypar CC 3 113 127 0 toggleoff
> > .showvalue on
> > $button 64
> > .easypar CC 3 114 127 0 toggleoff
> > .showvalue on
> > $end
> > 
> > All the best
> > 
> > Royec
> >
>