Bc2000 (for the BCF2000 & BCR2000)

Just to clarify what I meant here, my BCR and BCF are linked together
via MIDI cables with the BCF hooked to the PC via USB, so Royce's
editor, whenever it tries to refresh or send, receives from both units
at the same time, rending the MIDI in/output of the program useless to
me unless I turn off my BCR. 

Regards,
-Ryan


--- In bc2000@yahoogroups.com, "k0mp0" <k0mp0ser@...> wrote:
>
> Thanks for the reply Art, I've been using this editor since yesterday
> to write and save the script and sysex in, but I need to load it into
> SysEx Loader to send it, because Royce's doesn't seem to be able to
> tell the difference between the BCR and the BCF and doesn't let you
> reference the unit/system ID. My BCR won't accept sysex over USB mode,
> and I have them paired together as the BCF on the left in U-4 mode and
> the BCR on the right in S-3 mode.
> 
> Regards,
> Ryan
> 
> 
> --- In bc2000@yahoogroups.com, "abhunkin" <abhunkin@> wrote:
> >
> > Suggestion:
> > *Use Royce's editor.* And his help files. They work well and have 
> > pretty much all the info you need. This is the first download in the 
> > Files area (be sure to load the separate .zip help files as well).
> > 
> > Art Hunkins
> > 
> > --- In bc2000@yahoogroups.com, "k0mp0" <k0mp0ser@> wrote:
> > >
> > > Thanks, I found the problem. The problem was with Birdies BCFRedit, 
> > it
> > > wouldn't upload the SysEx properly. When I tried sending it using
> > > "Sysex Loader.exe", it immediately worked OK. 
> > > 
> > > Is there a list of all the different things you can use in the 
> > script
> > > and what they do? I've been reading the "Behringer's Secret?" PDF 
> > from
> > > this yahoo groups files page which is good info but it's not the 
> > full
> > > list of all the available commands I'm after if it's available.
> > > 
> > > Regards,
> > > -Ryan
> > > 
> > > --- In bc2000@yahoogroups.com, "rpcfender" <rpcfender@> wrote:
> > > >
> > > > Hi Ryan
> > > > 
> > > > It turns out it didn't work fully, I got the system buttons 
> > working OK,
> > > > sending CCs, but the preset keys don't send a CC at all.
> > > > 
> > > > Here's the main part of my preset, not including the other 
> > encoders &
> > > > buttons:
> > > > 
> > > > This works fine for me. The buttons put on channel 3 CC $71 or 
> > $72 with
> > > > a 'down' value of $7f and a release of 0
> > > > Check that you haven't redefined them lather in the preset. The 
> > BCR is
> > > > happy to redefine the button over and over again in the one 
> > preset. This
> > > > usually happens when you cut and paste and forget to change the 
> > button
> > > > number.
> > > > 
> > > > You could try just this snippet and if it works how you want it 
> > to then
> > > > it will definitely be  a redefinition.
> > > > You haven't defined $preset after  the buttons. The .init will 
> > clear
> > > > your settings.
> > > > Again the BCR is happy to have any number of $preset sections and 
> > it
> > > > will clear everything that has gone before.
> > > > 
> > > > Other than that, it looks good.
> > > > 
> > > > $rev R1
> > > > $preset
> > > > .name 'TRAKTOR (P2)            '
> > > > .snapshot off
> > > > .request off
> > > > .egroups 4
> > > > .fkeys off
> > > > .lock on
> > > > .init
> > > > $button 63
> > > > .easypar CC 3 113 127 0 toggleoff
> > > > .showvalue on
> > > > $button 64
> > > > .easypar CC 3 114 127 0 toggleoff
> > > > .showvalue on
> > > > $end
> > > > 
> > > > All the best
> > > > 
> > > > Royec
> > > >
> > >
> >
>