Bc2000 (for the BCF2000 & BCR2000)

Hi Ryan

on my editor go to the "Editor" tab, then the "Save & Get" tab and look
for the area called "Sysex Header Bytes"
Normally this is set to the Universal setting and for people with just
one machine it is fine. You will need to select  the BCF or BCR. There
is a device ID selection underneath if you need it.

I haven't been able to check this except on my BCR. Let me know how you
get on.

Royce

--- In bc2000@yahoogroups.com, "k0mp0" <k0mp0ser@...> wrote:
>
> Just to clarify what I meant here, my BCR and BCF are linked together
> via MIDI cables with the BCF hooked to the PC via USB, so Royce's
> editor, whenever it tries to refresh or send, receives from both units
> at the same time, rending the MIDI in/output of the program useless to
> me unless I turn off my BCR.
>
> Regards,
> -Ryan