Bc2000 (for the BCF2000 & BCR2000)

I tried this, it didn't work! But what I did find, was that the USB
port on the BCR had a problem, it's loose or something. After screwing
the BCR back together once I had removed and replaced the flash chip,
I held the USB lead down as I pushed it in and turned it on, and
noticed that windows didn't pop up an error from the tray saying the
usual "The I/O device reported an I/O error", so I was able to change
it to S-3 mode from which I could properly control the unit from. 

So, maybe one day I'll open it up to fix the USB port on it if I need
to, for now though I'll just leave it as it is and use it in S-3 mode!

Thanks for helping!
-Ryan

--- In bc2000@yahoogroups.com, "rpcfender" <rpcfender@...> wrote:
>
> 
> OK I messed up again
> 
>   Try this.
>   Power off the unit
>   Press and hold 'exit' &  'store'
> Power on while holding down the buttons.
>   This should initialize the preset buffer.
>