Bc2000 (for the BCF2000 & BCR2000)

Oy, mate!!!!

Luckily for me, I was able to achieve the same results with a bit less 
work, because I use Logic Audio 5.5 - but I'm gonna work with yer 
solution as well!

Cheers!!

Boogie

rpcfender wrote:
>
> Hi boogie,
>
> > I just need a simple answer to this -
> Unlikely 8)
>
> > On the BCR2000,  I want assign ALL 32 rotary knobs to CC7.
> > I want to send 16 of them (each on it's own MIDI channel 1-16) to
> > MIDI OUT "A" to a 16 channel multitimbral synth module
>
> Easy. Just use the font panel
>
> > Then,  I want to send 16 of them (each on it's own MIDI channel 1-16)
> > to MIDI OUT "B" to another 16 channel multitimbral synth module
> > This would allow me to control the individual volume on all the MIDI
> > channels on both modules.
> >
> >
> > Can this be done?
>
> Yes and no.
>
> No. The BCR200 can't do it by itself as you can't pick the port to 
> output to as far as I know. Out is Midi out however you configure the 
> unit so all the data will appear.
>
>
> Yes. If you had a PC you could set the BCR to USB mode 3.
> Then you could use MidiOx.
> Set up the CC7 encoders as normal.
> Set up a set of CC100 (any CC that you are not going to use) the same way.
>
> In MidiOx connect the BC USB to both the MidiA and MidiB of the BCR. 
> (View the Midi Port Routing window)
>
> You then need to create 2 map files.
> The first one just filters out CC100 on all channels using 'discard' 
> in the second drop down box.
> Save the file as *NoCC100*
> The second one does the same for CC7, but it also has a second line, a 
> Map from CC100 to CC7 on all channels.
> Save the file as *NoCC7*
>
> Save both of these. NoCC7 and NoCC100, into the MidiOx Directory 
> (C:\Program Files\MidiOx - or where every you set up MidiOx)
>
> In the Midi Port Routing window right click the small box on the 
> connecting line BCR USB to MidiA output and select properties.
> Go to the "Map File" drop down box and pick NoCC100 .
> When you turn CC7 encoder CC7 should come out, but when you turn a 
> CC100 encoder nothing should come out of MiidA
>
> Do the same for MidiB connection but choose NoCC7. The CC100 encoder 
> should send out CC7 out the MidiB port and CC7 encoder should send out 
> nothing.
>
> If you need these MidiOx Map Files email me and I send them to you, 
> but they are fairly easy to set up.
>
> Royce
>
>