Bc2000 (for the BCF2000 & BCR2000)

I've been using My self-made editors for the BCR2000 for a while now and it kicks ass 
(will post them as soon as I fixed te following problem) though 1 thing seems to be wrong 
with every one of them. The encoders don't seem to snap to a certain value. So some 
encoders will output : 31 32 31 32 31etc value when set to value 31.

I posted this problem here before and learned that this is most likely something wrong 
with the resolution settings. I tried different resolution settings but no luck.(I use BC-
convert on OSX) The problem is that I don't really know how to use the resolution 
parameters besides that the 4 values apply to 4 different turning speeds...

I wonder:

Do they have to "fit" the number of steps an encoder has?

So for instance if an encoder can only have 5 values (eg "val 0 4") do I have to adjust the 
resolution a certain way so that it can no longer jump between 3 and 4?

I now use the same resolution settings (eg. .resolution 24 48 56 96) for all encoders 
though some encoders have different ranges than others. so This might be the problem..?

Please Advise....

Cheers

The Maker