Bc2000 (for the BCF2000 & BCR2000)

Hi all,
Just wading through all the messages right now to a get a better 
idea of things so forgive me if this has been asked before.

I've done all the updates (firmware and USB drivers) to my new BCF 
2000 and managed to fix a problem with the BC Editor (thanks to 
Behringer support) by retro grading my Java from v1.5 to 1.4.8 and 
have used the Mackie and Baby HUI emulations to great effect, but 
now, being able to load the actual Cubase presets from the download 
page, I have grown quite fond of a few functions on these that are 
absent on the emulations.

However, after loading a project(blank or otherwise) in SX (3.1), 
when I go to change a fder (sometimes the rotary controllers too) 
the fader for channell 7 immediately shoots down to zero.

As you can imagine this is a bit of a problem.

However, when I spoke to Behringer support about this and the BC 
Edit problem, they said they had not heard of this behaviour.

Has anyone come across this and might be able to advise me how to 
fix it?

Many thanks
Craig Duncan.

Craig,

Check this out:
http://www.borg.com/~jglatt/tutr/ctl.htm

and try using MIDI-OX to see if what is actually happening when you
move things on the BCF.

Steve M

--- In bc2000@yahoogroups.com, "desyreuk99" <Desyreuk99@...> wrote:

>
> Hi all,
> Just wading through all the messages right now to a get a better 
> idea of things so forgive me if this has been asked before.
> 
> I've done all the updates (firmware and USB drivers) to my new BCF 
> 2000 and managed to fix a problem with the BC Editor (thanks to 
> Behringer support) by retro grading my Java from v1.5 to 1.4.8 and 
> have used the Mackie and Baby HUI emulations to great effect, but 
> now, being able to load the actual Cubase presets from the download 
> page, I have grown quite fond of a few functions on these that are 
> absent on the emulations.
> 
> However, after loading a project(blank or otherwise) in SX (3.1), 
> when I go to change a fder (sometimes the rotary controllers too) 
> the fader for channell 7 immediately shoots down to zero.
> 
> As you can imagine this is a bit of a problem.
> 
> However, when I spoke to Behringer support about this and the BC 
> Edit problem, they said they had not heard of this behaviour.
> 
> Has anyone come across this and might be able to advise me how to 
> fix it?
> 
> Many thanks
> Craig Duncan.
>