Bc2000 (for the BCF2000 & BCR2000)

downloaded huskervu 1.01 and tried installing it.it wanted me to 
download ms netframework 1.1.4322 downloaded that too and tried to 
install . and also finished installing huskervu . configured midi input 
and output to bcf2000(01). now booted my bcf in ncc mode and opened 
cubase. checked the controller settings. mackie control was there with 
output and input to bcf2000(01). tried creating a new empty project in 
cubase sx 3. and add midi track and then loaded refx nexus in vst and 
configured output to it. and as per stefan advice tried to press shift 
key and corresponding instrument key as per template. huskervu was 
still blank. tried moving the faders. i was able to move the first 
fader but with a screech sound when i move the fader the nexus 
interface nor the huskervy showed any change. i was able to move the 
secondfader but with no visible cange in interface. other faders when i 
tried to move reset back to lowest position. 

what can i do more?

you made a mistake in your MIDI routing.

the huskerVU display needs to get the OUTPUT from CUBASE,
not directly the data coming from your BCF.

and for a correct routing/usage for huskervu you need a virtual MIDI
patchbay. i recommend using MIDIYoke for that.

after installing MIDIYoke you should use a routing like this:

cubase should use bcf2000(01) as IN port for mackie control.
cubase should use MIDIYoke NT1 as OUT port for mackie control.

huskerVU then uses MIDIYoke NT1 as IN port
and bcf2000(01)as OUT port


alltogether it should look like this:

bcf2000(01)  -> (in from) CUBASE (out to) -> MIDIYoke NT1

MIDIYoke NT1 -> (in from)HuskerVU(out to) -> bcf2000(01)


if you follow exactly that routing, everything should work.

> downloaded huskervu 1.01 and tried installing it.it wanted me to 
> download ms netframework 1.1.4322 downloaded that too and tried to 
> install . and also finished installing huskervu . configured midi input 
> and output to bcf2000(01). now booted my bcf in ncc mode and opened 
> cubase. checked the controller settings. mackie control was there with 
> output and input to bcf2000(01). tried creating a new empty project in 
> cubase sx 3. and add midi track and then loaded refx nexus in vst and 
> configured output to it. and as per stefan advice tried to press shift 
> key and corresponding instrument key as per template. huskervu was 
> still blank. tried moving the faders. i was able to move the first 
> fader but with a screech sound when i move the fader the nexus 
> interface nor the huskervy showed any change. i was able to move the 
> secondfader but with no visible cange in interface. other faders when i 
> tried to move reset back to lowest position. 
> 
> what can i do more?
>