Bc2000 (for the BCF2000 & BCR2000)

>
> Hi, I am new in this this forum and a new user of bcf-2000. I want to use my bcf-2000 with DasLight (version DVC3). For this the presets have to be reprogrammed to "CC" only. This works fine with the BCF. Both BCF manager and BC-Edit communicate with the BCF, however I cannot actively send and receive data, the functions in the drop-down menue are not active. With the very old BC-Edit it works (old PC with old Java). What an I doing wrong?
> Regards, maxichip99
>

>
> Let me add that I cannot allocate an input or outpout channel:all ports are shown as disabled.
> 
> --- In bc2000@yahoogroups.com, "maxichip99" <njersch@> wrote:
> >
> > Hi, I am new in this this forum and a new user of bcf-2000. I want to use my bcf-2000 with DasLight (version DVC3). For this the presets have to be reprogrammed to "CC" only. This works fine with the BCF. Both BCF manager and BC-Edit communicate with the BCF, however I cannot actively send and receive data, the functions in the drop-down menue are not active. With the very old BC-Edit it works (old PC with old Java). What an I doing wrong?
> > Regards, maxichip99
> >
>

>
> You can program the BCF from my editor (File section) using the BC2000 programming language or you can get Mark's graphic editor (link is in the Link area - Mountain Utilities).
> Either will let you get to all the functions of the BC2000. A lot of these functions can't be programmed any other way.
> 
> Royce
> 
> --- In bc2000@yahoogroups.com, "maxichip99" <njersch@> wrote:
> >
> > Let me add that I cannot allocate an input or outpout channel:all ports are shown as disabled.
> > 
> > --- In bc2000@yahoogroups.com, "maxichip99" <njersch@> wrote:
> > >
> > > Hi, I am new in this this forum and a new user of bcf-2000. I want to use my bcf-2000 with DasLight (version DVC3). For this the presets have to be reprogrammed to "CC" only. This works fine with the BCF. Both BCF manager and BC-Edit communicate with the BCF, however I cannot actively send and receive data, the functions in the drop-down menue are not active. With the very old BC-Edit it works (old PC with old Java). What an I doing wrong?
> > > Regards, maxichip99
> > >
> >
>

>
> --- In bc2000@yahoogroups.com, "maxichip99" <njersch@> wrote:
> > I tried with the graphic editor and the BCF ist identified as enabled device with input and output functionality. However, with the BC Manager I always get "disabled BCF 2000". I am connected via USB only. What else can I do?
> 
> Have you managed to fix this yet?
> As far as I know, if a device in the "B-Controls" window is "Disabled", this can only mean that its MIDI input and output ports have not been enabled via the main window's Options -> "MIDI devices" dialog box.
> Ticking the pertinent checkboxes should fix this.
> 
> Hope this helps,
> Mark.
>