Bc2000 (for the BCF2000 & BCR2000)

I was wondering if you could have it when you touched a knob on the 
BCR that it would "select" that channel and make it active.  The 
preset I'm using from the files section (Dave 40 Vols) has a button 
that activates the expanded track veiw (with eq and such) for 
whatever channel is active, so I just need to know how to make it 
jump to that active track.

I want to set up Solos and Mutes on the active channel once I get 
this sorted, but that should be fairly simple.

Sorta OT, I noticed in bcfredit that you can tweak the "store", 
"edit" and such controls... can you over ride their function to get 
an extra few buttons?

its been a while, but i don't know if there was a dedicated track 
select function available on the BCR... i think the 40 Vols preset 
was just me trying to graft some of the Staffi preset onto a big mixer

i'm sure it can be done... there are Track Up/Down buttons in the 
original Staffi preset on the lower right buttons; you may want to 
just copy those settings using the editor

i think i had originally assigned those to the transport, but i use 
the num pad on my keyboard almost exclusively for that

Dave

--- In bc2000@yahoogroups.com, "Kevin Richard" <gilligan_rocks@...> 
wrote:

>
> I was wondering if you could have it when you touched a knob on the 
> BCR that it would "select" that channel and make it active.  The 
> preset I'm using from the files section (Dave 40 Vols) has a button 
> that activates the expanded track veiw (with eq and such) for 
> whatever channel is active, so I just need to know how to make it 
> jump to that active track.
> 
> I want to set up Solos and Mutes on the active channel once I get 
> this sorted, but that should be fairly simple.
> 
> Sorta OT, I noticed in bcfredit that you can tweak the "store", 
> "edit" and such controls... can you over ride their function to get 
> an extra few buttons?
>

actually, now that i've checked, i grafted the EQ sections from 
ToneMill's cubase_sx_24_plus.xml onto a big mixer

his uses the lower two right buttons to Bank Up/Down

don't know if its possible to auto-select with BCR... i think the 
FaderPort from Frontier Designs does... it might be possible to check 
its command sequence to see if there's a way

if i figure it out, i'll try posting it here

Dave

Cool, I'm very new to this stuff so some of it is over my head at the 
moment... I'm sure I'll figure it out (this head cold I have isn't 
helping right now either!)

Yeah, I don't really know what your buttons do down there except 
bring up the mixer (top right) and the expanded track section (top 
left?)

Well, off to bed again :(

--- In bc2000@yahoogroups.com, "davezedlee" <davezedlee@...> wrote:
>
> actually, now that i've checked, i grafted the EQ sections from 
> ToneMill's cubase_sx_24_plus.xml onto a big mixer
> 
> his uses the lower two right buttons to Bank Up/Down
> 
> don't know if its possible to auto-select with BCR... i think the 
> FaderPort from Frontier Designs does... it might be possible to 
check 

> its command sequence to see if there's a way
> 
> if i figure it out, i'll try posting it here
> 
> Dave
>