Bc2000 (for the BCF2000 & BCR2000)

Hello to all,
 I put a few photos in newsgroups that explain an mod I made in my
bcf2000, concerning encoder groups switch
Who had the need to remotely via midi that switches can use a switch
led to another.I used a optotransistor TLP521 and an electrolytic
capacitor 100uF for each switch.I hope that the images are clearer,
compared to my English.

Hi Alessandro,

Your English is fine. And your spirit is even better, thanks for
sharing information!!! 

So where are the photos? Did you also post a schematic?

Thank you,

steve m

--- In bc2000@yahoogroups.com, "Alessandro" <aledibox@...> wrote:

>
> Hello to all,
>  I put a few photos in newsgroups that explain an mod I made in my
> bcf2000, concerning encoder groups switch
> Who had the need to remotely via midi that switches can use a switch
> led to another.I used a optotransistor TLP521 and an electrolytic
> capacitor 100uF for each switch.I hope that the images are clearer,
> compared to my English.
>

Hello Steve, the photos are inside the newsgroups in mod pic
directory. I did not make any schematic
 because the mod is very simple. In my set-up i'm using the bcf2000 in
slave mode the master is one digital mixer then i need to remote this
the encoders grups switch. My idea is to use the led situated under
the 4 switches (47-48-49-50) and    
 in this mode i can to make replay the command using  one
optotransistor connected in parallel to 4 switch encoders
(57-58-59-60) so that we can have all the 4 groups remotable via midi.
the optotransistor and the capacitor type i wrote in the last post
 
ciao
Alessandro

Never miss a thing. Make Yahoo your homepage.