Hi list, I'm peeping here for a while and this is my first posting.
I've no EE or whatsoever background so my querry might be dumb. I'm
shopping for parts and wonder if I could replace the VOLT value of
electrolytic caps by any other value as long as it is higher than
the PSU used puts out: Can I use 47uF 16V instead of 47uF 25 V (for
the Burst Gen.)?
On the pcb of Burst Gen there is a pad CLK O is that a clock output?
Since there is no clock out mentioned in the description nor visible
on the faceplate I'm at a loss. Any help would be higly appreciated!
Thanks, Ilanode
I've no EE or whatsoever background so my querry might be dumb. I'm
shopping for parts and wonder if I could replace the VOLT value of
electrolytic caps by any other value as long as it is higher than
the PSU used puts out: Can I use 47uF 16V instead of 47uF 25 V (for
the Burst Gen.)?
On the pcb of Burst Gen there is a pad CLK O is that a clock output?
Since there is no clock out mentioned in the description nor visible
on the faceplate I'm at a loss. Any help would be higly appreciated!
Thanks, Ilanode