It should. The ratio is what is important, not the values. Needless to say
though, you do not want to have your resistance too low, as you will start
to load up the power supply. By too low, I'm talking under 1k.
Ken
Ken Stone sasami@... or sasami@...
Modular Synth PCBs for sale <http://www.blaze.net.au/~sasami/synth/>
Australian Miniature Horses & Ponies <http://www.blaze.net.au/~sasami/>
though, you do not want to have your resistance too low, as you will start
to load up the power supply. By too low, I'm talking under 1k.
Ken
>_______________________________________________________________________
>
>thx for the link !
>that one should work if I use a 5k resistor for XXk as shown in
>Ken's diagram for the joystick controller ?
>grtz,
>Steven
>
>--- In cgs_synth@yahoogroups.com, "rdrake" <rdrake@d...> wrote:
>> Electronic Surplus in cleveland has some, 5k each axis, $4.95:
>>
>> http://www.electronicsurplus.com/commerce/catalog/product.jsp?
>product_id=71233&czuid=1109186479521
>>
>>
>>
>> >----- ------- Original Message ------- -----
>> >From: cgs_synth@yahoogroups.com
>> >To: cgs_synth@yahoogroups.com
>> >Sent: 23 Feb 2005 15:51:55
>> >Subject: Re: joysticks
>> >
>> >
>> >Does somebody found a partnumber for a good
>> >joystick ?
>> >
>> >they only ones I found are from ALPS ref.
>> >RKJXK122000D (available
>> >from mouser)
>> >they are 10kOhm and only rated for 5VDC, so I doubt
>> >if they can be
>> >used ?
>> >
>> >Any alternatives ?
>> >
>> >thx,
>> >Steven
>> >--- In cgs_synth@yahoogroups.com, Peng
>> ><peng3002@y...> wrote:
>> >> I looked around for awhile for joysticks. Best
>> >deal I found are
>> >remote controlled airplane transmitters. I bought
>> >mine for $20. You
>> >get 2 joysticks and a few switches that you came
>> >make into gate
>> >and/or trigger. Get a few and put your keyboard
>> >aside (hopefully
>> >forever !!)
>> >>
>> >> the P.
>> >>
>> >>
>> >> ---------------------------------
>> >> Do you Yahoo!?
>> >> Yahoo! SiteBuilder - Free web site building tool.
>> >Try it!
>> >>
>> >> [Non-text portions of this message have been
>> >removed]
>> >
>> >
>> >
>> >
>> >
>> >___________________________________________________
>> >_____________________
>> >___________________________________________________
>> >_____________________
>> >
>> >
>> >See the following URLS for the CGS Modular Synth
>> >home page:
>> >Main: http://www.cgs.synth.net/
>> >Secondary: http://otherunicorn.0catch.com/synth/
>> >---------------------------------------------------
>> >---------------------
>> >Yahoo! Groups Links
>> >
>> >
>> > cgs_synth-unsubscribe@yahoogroups.com
>> >
>> >
>> >---------------------------------------------------
>> >---------------------
>
>
>
>
>
>
>See the following URLS for the CGS Modular Synth home page:
>Main: http://www.cgs.synth.net/
>Secondary: http://otherunicorn.0catch.com/synth/
>Yahoo! Groups Links
>
>
>
>
>
>
>
>
Ken Stone sasami@... or sasami@...
Modular Synth PCBs for sale <http://www.blaze.net.au/~sasami/synth/>
Australian Miniature Horses & Ponies <http://www.blaze.net.au/~sasami/>