Cgs synth

>I'm sure this is a silly question but as a neophyte I would
>appreciate some advice... I'm planning on building a stand-alone
>filter box using the stomp box adapter and 1 or 2 steiner VCFs
>along with the dual LFO or a couple of psycho LFOs to modulate
>the frequency cutoffs and I'm wondering if the line-lump power
>suppy that powers the adapter board can be used the power the
>filters and modulators at the same time and how one would go
>about wiring that. Thanks in advance.

That's the idea actually. You will find 0V (GND), +VE and -VE pads on the
stomp box adapter that are there to power other PCBs. Just wire these to the
power inputs on the other boards. Make sure you use a line-lump with enough
power output for the job, and if the regulators get hot, add small heatsinks
to them. I'd guess a 250ma or there abouts line-lump would be adequate, but
measuring the current drawn when you are finished would be the best way to
work that out.

Ken

_______________________________________________________________________
Ken Stone sasami@... or sasami@...
Modular Synth PCBs for sale <http://www.blaze.net.au/~sasami/synth/>
Australian Miniature Horses & Ponies <http://www.blaze.net.au/~sasami/>