I had the same issue, with CGS35 and fracrack because they are
so dissimilar in size/shape.
I ended up putting the long/skinny board on perf and mounting
the perf to the fracrack. I have some other mods as well
but the basic idea is here:
http://www.charlielamm.com/synth/steiner/index.php
You can see photos of how I built it towards the bottom of the page.
I can't speak for the exact front panel design though since my unit has
some mods that yours probably won't. However, you could probably get away
with a 2u fracrack with four knobs: freq, Q, and 2 mod pots. Jack wise,
use 3 inputs and one output, along with 2 mod inputs, so 4 knobs and 6
1/8" jacks. That would fit pretty well on 2u fracrack panel, although
assembly might be easier with a 3u one.
--CL
so dissimilar in size/shape.
I ended up putting the long/skinny board on perf and mounting
the perf to the fracrack. I have some other mods as well
but the basic idea is here:
http://www.charlielamm.com/synth/steiner/index.php
You can see photos of how I built it towards the bottom of the page.
I can't speak for the exact front panel design though since my unit has
some mods that yours probably won't. However, you could probably get away
with a 2u fracrack with four knobs: freq, Q, and 2 mod pots. Jack wise,
use 3 inputs and one output, along with 2 mod inputs, so 4 knobs and 6
1/8" jacks. That would fit pretty well on 2u fracrack panel, although
assembly might be easier with a 3u one.
--CL
On Mon, 30 May 2005, flatsix01 wrote:
> Just finished populating the CGS35 VCF board and I am wondering if any
> FracRack sized front panel designs are floating around for this board?
>
> If not, any suggestions on 'ideal arrangement' of pots/jacks?
>
> Thanks!
> JON
>
>
>
>
>
> See the following URLS for the CGS Modular Synth home page:
> Main: http://www.cgs.synth.net/
> Secondary: http://otherunicorn.0catch.com/synth/
> Yahoo! Groups Links
>
>
>
>
>
>