Cgs synth

On Mon, 30 May 2005, flatsix01 wrote:

> Just finished populating the CGS35 VCF board and I am wondering if any
> FracRack sized front panel designs are floating around for this board?
>
> If not, any suggestions on 'ideal arrangement' of pots/jacks?
>
> Thanks!
> JON
>
>
>
>
>
> See the following URLS for the CGS Modular Synth home page:
> Main: http://www.cgs.synth.net/
> Secondary: http://otherunicorn.0catch.com/synth/
> Yahoo! Groups Links
>
>
>
>
>
>

--- In cgs_synth@yahoogroups.com, <cgs@o...> wrote:
> I had the same issue, with CGS35 and fracrack because they are
> so dissimilar in size/shape.
>
> I ended up putting the long/skinny board on perf and mounting
> the perf to the fracrack. I have some other mods as well
> but the basic idea is here:
>
> http://www.charlielamm.com/synth/steiner/index.php
>
> You can see photos of how I built it towards the bottom of the page.
>
> I can't speak for the exact front panel design though since my unit has
> some mods that yours probably won't. However, you could probably get
away
> with a 2u fracrack with four knobs: freq, Q, and 2 mod pots. Jack wise,
> use 3 inputs and one output, along with 2 mod inputs, so 4 knobs and 6
> 1/8" jacks. That would fit pretty well on 2u fracrack panel, although
> assembly might be easier with a 3u one.
>
>
> --CL
>
>
> On Mon, 30 May 2005, flatsix01 wrote:
>
> > Just finished populating the CGS35 VCF board and I am wondering if any
> > FracRack sized front panel designs are floating around for this board?
> >
> > If not, any suggestions on 'ideal arrangement' of pots/jacks?
> >
> > Thanks!
> > JON
> >
> >
> >
> >
> >
> > See the following URLS for the CGS Modular Synth home page:
> > Main: http://www.cgs.synth.net/
> > Secondary: http://otherunicorn.0catch.com/synth/
> > Yahoo! Groups Links
> >
> >
> >
> >
> >
> >

>I had the same issue, with CGS35 and fracrack because they are
>so dissimilar in size/shape.
>
>I ended up putting the long/skinny board on perf and mounting
>the perf to the fracrack. I have some other mods as well
>but the basic idea is here:
>
>http://www.charlielamm.com/synth/steiner/index.php
>
>You can see photos of how I built it towards the bottom of the page.
>
>I can't speak for the exact front panel design though since my unit has
>some mods that yours probably won't. However, you could probably get away
>with a 2u fracrack with four knobs: freq, Q, and 2 mod pots. Jack wise,
>use 3 inputs and one output, along with 2 mod inputs, so 4 knobs and 6
>1/8" jacks. That would fit pretty well on 2u fracrack panel, although
>assembly might be easier with a 3u one.
>
>
>--CL
>
>
>On Mon, 30 May 2005, flatsix01 wrote:
>
>> Just finished populating the CGS35 VCF board and I am wondering if any
>> FracRack sized front panel designs are floating around for this board?
>>
>> If not, any suggestions on 'ideal arrangement' of pots/jacks?
>>
>> Thanks!
>> JON
>>
>>
>>
>>
>>
>> See the following URLS for the CGS Modular Synth home page:
>> Main: http://www.cgs.synth.net/
>> Secondary: http://otherunicorn.0catch.com/synth/
>> Yahoo! Groups Links
>>
>>
>>
>>
>>
>>
>
>
>
>
>See the following URLS for the CGS Modular Synth home page:
>Main: http://www.cgs.synth.net/
>Secondary: http://otherunicorn.0catch.com/synth/
>Yahoo! Groups Links
>
>
>
>
>
>
>

--- In cgs_synth@yahoogroups.com, sasami@h... wrote:
> I have considered doing a Frac-rack version of this PCB. If you guys put
> your heads together and come up with a panel layout that is
suitable, you
> may even get the pots mounted on the PCB edge. Pots in a single virtical
> line, please.
>
> Ken
>
> >I had the same issue, with CGS35 and fracrack because they are
> >so dissimilar in size/shape.
> >
> >I ended up putting the long/skinny board on perf and mounting
> >the perf to the fracrack. I have some other mods as well
> >but the basic idea is here:
> >
> >http://www.charlielamm.com/synth/steiner/index.php
> >
> >You can see photos of how I built it towards the bottom of the page.
> >
> >I can't speak for the exact front panel design though since my unit has
> >some mods that yours probably won't. However, you could probably
get away
> >with a 2u fracrack with four knobs: freq, Q, and 2 mod pots. Jack
wise,
> >use 3 inputs and one output, along with 2 mod inputs, so 4 knobs and 6
> >1/8" jacks. That would fit pretty well on 2u fracrack panel, although
> >assembly might be easier with a 3u one.
> >
> >
> >--CL
> >
> >
> >On Mon, 30 May 2005, flatsix01 wrote:
> >
> >> Just finished populating the CGS35 VCF board and I am wondering
if any
> >> FracRack sized front panel designs are floating around for this
board?
> >>
> >> If not, any suggestions on 'ideal arrangement' of pots/jacks?
> >>
> >> Thanks!
> >> JON
> >>
> >>
> >>
> >>
> >>
> >> See the following URLS for the CGS Modular Synth home page:
> >> Main: http://www.cgs.synth.net/
> >> Secondary: http://otherunicorn.0catch.com/synth/
> >> Yahoo! Groups Links
> >>
> >>
> >>
> >>
> >>
> >>
> >
> >
> >
> >
> >See the following URLS for the CGS Modular Synth home page:
> >Main: http://www.cgs.synth.net/
> >Secondary: http://otherunicorn.0catch.com/synth/
> >Yahoo! Groups Links
> >
> >
> >
> >
> >
> >
> >
> _______________________________________________________________________
> Ken Stone sasami@h... or sasami@c...
> Modular Synth PCBs for sale <http://www.blaze.net.au/~sasami/synth/>
> Australian Miniature Horses & Ponies <http://www.blaze.net.au/~sasami/>

--- In cgs_synth@yahoogroups.com, sasami@h... wrote:
> I have considered doing a Frac-rack version of this PCB. If you guys put
> your heads together and come up with a panel layout that is
suitable, you
> may even get the pots mounted on the PCB edge. Pots in a single virtical
> line, please.
>
> Ken
>
> >I had the same issue, with CGS35 and fracrack because they are
> >so dissimilar in size/shape.
> >
> >I ended up putting the long/skinny board on perf and mounting
> >the perf to the fracrack. I have some other mods as well
> >but the basic idea is here:
> >
> >http://www.charlielamm.com/synth/steiner/index.php
> >
> >You can see photos of how I built it towards the bottom of the page.
> >
> >I can't speak for the exact front panel design though since my unit has
> >some mods that yours probably won't. However, you could probably
get away
> >with a 2u fracrack with four knobs: freq, Q, and 2 mod pots. Jack
wise,
> >use 3 inputs and one output, along with 2 mod inputs, so 4 knobs and 6
> >1/8" jacks. That would fit pretty well on 2u fracrack panel, although
> >assembly might be easier with a 3u one.
> >
> >
> >--CL
> >
> >
> >On Mon, 30 May 2005, flatsix01 wrote:
> >
> >> Just finished populating the CGS35 VCF board and I am wondering
if any
> >> FracRack sized front panel designs are floating around for this
board?
> >>
> >> If not, any suggestions on 'ideal arrangement' of pots/jacks?
> >>
> >> Thanks!
> >> JON
> >>
> >>
> >>
> >>
> >>
> >> See the following URLS for the CGS Modular Synth home page:
> >> Main: http://www.cgs.synth.net/
> >> Secondary: http://otherunicorn.0catch.com/synth/
> >> Yahoo! Groups Links
> >>
> >>
> >>
> >>
> >>
> >>
> >
> >
> >
> >
> >See the following URLS for the CGS Modular Synth home page:
> >Main: http://www.cgs.synth.net/
> >Secondary: http://otherunicorn.0catch.com/synth/
> >Yahoo! Groups Links
> >
> >
> >
> >
> >
> >
> >
> _______________________________________________________________________
> Ken Stone sasami@h... or sasami@c...
> Modular Synth PCBs for sale <http://www.blaze.net.au/~sasami/synth/>
> Australian Miniature Horses & Ponies <http://www.blaze.net.au/~sasami/>

--- In cgs_synth@yahoogroups.com, "flatsix01" <flatsix01@y...> wrote:
> OK - I have created both a horizontal and a vertical oriented Front
> Panel Design, and uploaded them to the Files area.
>
> They are my first attempts at panels, so please give suggestions etc.
>
> I purposely omitted the "corner" drillholes because I am not sure
> exactly where they should go? Any help on this?
>
> JON
>
>
> --- In cgs_synth@yahoogroups.com, sasami@h... wrote:
> > I have considered doing a Frac-rack version of this PCB. If you
guys put
> > your heads together and come up with a panel layout that is
> suitable, you
> > may even get the pots mounted on the PCB edge. Pots in a single
virtical
> > line, please.
> >
> > Ken
> >
> > >I had the same issue, with CGS35 and fracrack because they are
> > >so dissimilar in size/shape.
> > >
> > >I ended up putting the long/skinny board on perf and mounting
> > >the perf to the fracrack. I have some other mods as well
> > >but the basic idea is here:
> > >
> > >http://www.charlielamm.com/synth/steiner/index.php
> > >
> > >You can see photos of how I built it towards the bottom of the page.
> > >
> > >I can't speak for the exact front panel design though since my
unit has
> > >some mods that yours probably won't. However, you could probably
> get away
> > >with a 2u fracrack with four knobs: freq, Q, and 2 mod pots. Jack
> wise,
> > >use 3 inputs and one output, along with 2 mod inputs, so 4 knobs
and 6
> > >1/8" jacks. That would fit pretty well on 2u fracrack panel,
although
> > >assembly might be easier with a 3u one.
> > >
> > >
> > >--CL
> > >
> > >
> > >On Mon, 30 May 2005, flatsix01 wrote:
> > >
> > >> Just finished populating the CGS35 VCF board and I am wondering
> if any
> > >> FracRack sized front panel designs are floating around for this
> board?
> > >>
> > >> If not, any suggestions on 'ideal arrangement' of pots/jacks?
> > >>
> > >> Thanks!
> > >> JON
> > >>
> > >>
> > >>
> > >>
> > >>
> > >> See the following URLS for the CGS Modular Synth home page:
> > >> Main: http://www.cgs.synth.net/
> > >> Secondary: http://otherunicorn.0catch.com/synth/
> > >> Yahoo! Groups Links
> > >>
> > >>
> > >>
> > >>
> > >>
> > >>
> > >
> > >
> > >
> > >
> > >See the following URLS for the CGS Modular Synth home page:
> > >Main: http://www.cgs.synth.net/
> > >Secondary: http://otherunicorn.0catch.com/synth/
> > >Yahoo! Groups Links
> > >
> > >
> > >
> > >
> > >
> > >
> > >
> >
_______________________________________________________________________
> > Ken Stone sasami@h... or sasami@c...
> > Modular Synth PCBs for sale <http://www.blaze.net.au/~sasami/synth/>
> > Australian Miniature Horses & Ponies
<http://www.blaze.net.au/~sasami/>

--- In cgs_synth@yahoogroups.com, "flatsix01" <flatsix01@y...> wrote:
> So any feedback on this?
>
> I am anxious to send it out for fabrication :)
>
> JON
>
>
>
> --- In cgs_synth@yahoogroups.com, "flatsix01" <flatsix01@y...> wrote:
> > OK - I have created both a horizontal and a vertical oriented Front
> > Panel Design, and uploaded them to the Files area.
> >
> > They are my first attempts at panels, so please give suggestions etc.
> >
> > I purposely omitted the "corner" drillholes because I am not sure
> > exactly where they should go? Any help on this?
> >
> > JON
> >
> >
> > --- In cgs_synth@yahoogroups.com, sasami@h... wrote:
> > > I have considered doing a Frac-rack version of this PCB. If you
> guys put
> > > your heads together and come up with a panel layout that is
> > suitable, you
> > > may even get the pots mounted on the PCB edge. Pots in a single
> virtical
> > > line, please.
> > >
> > > Ken
> > >
> > > >I had the same issue, with CGS35 and fracrack because they are
> > > >so dissimilar in size/shape.
> > > >
> > > >I ended up putting the long/skinny board on perf and mounting
> > > >the perf to the fracrack. I have some other mods as well
> > > >but the basic idea is here:
> > > >
> > > >http://www.charlielamm.com/synth/steiner/index.php
> > > >
> > > >You can see photos of how I built it towards the bottom of the page.
> > > >
> > > >I can't speak for the exact front panel design though since my
> unit has
> > > >some mods that yours probably won't. However, you could probably
> > get away
> > > >with a 2u fracrack with four knobs: freq, Q, and 2 mod pots. Jack
> > wise,
> > > >use 3 inputs and one output, along with 2 mod inputs, so 4 knobs
> and 6
> > > >1/8" jacks. That would fit pretty well on 2u fracrack panel,
> although
> > > >assembly might be easier with a 3u one.
> > > >
> > > >
> > > >--CL
> > > >
> > > >
> > > >On Mon, 30 May 2005, flatsix01 wrote:
> > > >
> > > >> Just finished populating the CGS35 VCF board and I am wondering
> > if any
> > > >> FracRack sized front panel designs are floating around for this
> > board?
> > > >>
> > > >> If not, any suggestions on 'ideal arrangement' of pots/jacks?
> > > >>
> > > >> Thanks!
> > > >> JON

>So any feedback on this?
>
>I am anxious to send it out for fabrication :)
>
>JON
>
>
>
>--- In cgs_synth@yahoogroups.com, "flatsix01" <flatsix01@y...> wrote:
>> OK - I have created both a horizontal and a vertical oriented Front
>> Panel Design, and uploaded them to the Files area.
>>
>> They are my first attempts at panels, so please give suggestions etc.
>>
>> I purposely omitted the "corner" drillholes because I am not sure
>> exactly where they should go? Any help on this?
>>
>> JON
>>
>>
>> --- In cgs_synth@yahoogroups.com, sasami@h... wrote:
>> > I have considered doing a Frac-rack version of this PCB. If you
>guys put
>> > your heads together and come up with a panel layout that is
>> suitable, you
>> > may even get the pots mounted on the PCB edge. Pots in a single
>virtical
>> > line, please.
>> >
>> > Ken
>> >
>> > >I had the same issue, with CGS35 and fracrack because they are
>> > >so dissimilar in size/shape.
>> > >
>> > >I ended up putting the long/skinny board on perf and mounting
>> > >the perf to the fracrack. I have some other mods as well
>> > >but the basic idea is here:
>> > >
>> > >http://www.charlielamm.com/synth/steiner/index.php
>> > >
>> > >You can see photos of how I built it towards the bottom of the page.
>> > >
>> > >I can't speak for the exact front panel design though since my
>unit has
>> > >some mods that yours probably won't. However, you could probably
>> get away
>> > >with a 2u fracrack with four knobs: freq, Q, and 2 mod pots. Jack
>> wise,
>> > >use 3 inputs and one output, along with 2 mod inputs, so 4 knobs
>and 6
>> > >1/8" jacks. That would fit pretty well on 2u fracrack panel,
>although
>> > >assembly might be easier with a 3u one.
>> > >
>> > >
>> > >--CL
>> > >
>> > >
>> > >On Mon, 30 May 2005, flatsix01 wrote:
>> > >
>> > >> Just finished populating the CGS35 VCF board and I am wondering
>> if any
>> > >> FracRack sized front panel designs are floating around for this
>> board?
>> > >>
>> > >> If not, any suggestions on 'ideal arrangement' of pots/jacks?
>> > >>
>> > >> Thanks!
>> > >> JON
>> > >>
>> > >>
>> > >>
>> > >>
>> > >>
>> > >> See the following URLS for the CGS Modular Synth home page:
>> > >> Main: http://www.cgs.synth.net/
>> > >> Secondary: http://otherunicorn.0catch.com/synth/
>> > >> Yahoo! Groups Links
>> > >>
>> > >>
>> > >>
>> > >>
>> > >>
>> > >>
>> > >
>> > >
>> > >
>> > >
>> > >See the following URLS for the CGS Modular Synth home page:
>> > >Main: http://www.cgs.synth.net/
>> > >Secondary: http://otherunicorn.0catch.com/synth/
>> > >Yahoo! Groups Links
>> > >
>> > >
>> > >
>> > >
>> > >
>> > >
>> > >
>> >
>_______________________________________________________________________
>> > Ken Stone sasami@h... or sasami@c...
>> > Modular Synth PCBs for sale <http://www.blaze.net.au/~sasami/synth/>
>> > Australian Miniature Horses & Ponies
><http://www.blaze.net.au/~sasami/>
>
>
>
>
>
>
>See the following URLS for the CGS Modular Synth home page:
>Main: http://www.cgs.synth.net/
>Secondary: http://otherunicorn.0catch.com/synth/
>Yahoo! Groups Links
>
>
>
>
>
>
>
>

--- In cgs_synth@yahoogroups.com, "supisuzoi" <son_of_zoggs@c...> wrote:
> I just upped a photo of my newly-finished, Frac-sized Bionic Filter.
Yup, had to rename it,
> too... I have an aversion to ticks. Anyhow, it's an FPE design,
matching with the rest of my
> synth.
>
> Soggy
>
>
>
> --- In cgs_synth@yahoogroups.com, "flatsix01" <flatsix01@y...> wrote:
> > So any feedback on this?
> >
> > I am anxious to send it out for fabrication :)
> >
> > JON
> >
> >
> >
> > --- In cgs_synth@yahoogroups.com, "flatsix01" <flatsix01@y...> wrote:
> > > OK - I have created both a horizontal and a vertical oriented Front
> > > Panel Design, and uploaded them to the Files area.
> > >
> > > They are my first attempts at panels, so please give suggestions
etc.
> > >
> > > I purposely omitted the "corner" drillholes because I am not sure
> > > exactly where they should go? Any help on this?
> > >
> > > JON
> > >
> > >
> > > --- In cgs_synth@yahoogroups.com, sasami@h... wrote:
> > > > I have considered doing a Frac-rack version of this PCB. If you
> > guys put
> > > > your heads together and come up with a panel layout that is
> > > suitable, you
> > > > may even get the pots mounted on the PCB edge. Pots in a single
> > virtical
> > > > line, please.
> > > >
> > > > Ken
> > > >
> > > > >I had the same issue, with CGS35 and fracrack because they are
> > > > >so dissimilar in size/shape.
> > > > >
> > > > >I ended up putting the long/skinny board on perf and mounting
> > > > >the perf to the fracrack. I have some other mods as well
> > > > >but the basic idea is here:
> > > > >
> > > > >http://www.charlielamm.com/synth/steiner/index.php
> > > > >
> > > > >You can see photos of how I built it towards the bottom of
the page.
> > > > >
> > > > >I can't speak for the exact front panel design though since my
> > unit has
> > > > >some mods that yours probably won't. However, you could probably
> > > get away
> > > > >with a 2u fracrack with four knobs: freq, Q, and 2 mod pots.
Jack
> > > wise,
> > > > >use 3 inputs and one output, along with 2 mod inputs, so 4 knobs
> > and 6
> > > > >1/8" jacks. That would fit pretty well on 2u fracrack panel,
> > although
> > > > >assembly might be easier with a 3u one.
> > > > >
> > > > >
> > > > >--CL
> > > > >
> > > > >
> > > > >On Mon, 30 May 2005, flatsix01 wrote:
> > > > >
> > > > >> Just finished populating the CGS35 VCF board and I am wondering
> > > if any
> > > > >> FracRack sized front panel designs are floating around for this
> > > board?
> > > > >>
> > > > >> If not, any suggestions on 'ideal arrangement' of pots/jacks?
> > > > >>
> > > > >> Thanks!
> > > > >> JON

--- In cgs_synth@yahoogroups.com, sasami@h... wrote:
> Too many things to do, not enought time to do it, and my software
was on a
> HD that died, as I discovered when I tried to open the fpd..... so
sorry,
> nothing yet.
>
> Ken
>
> >So any feedback on this?
> >
> >I am anxious to send it out for fabrication :)
> >
> >JON
> >
> >
> >
> >--- In cgs_synth@yahoogroups.com, "flatsix01" <flatsix01@y...> wrote:
> >> OK - I have created both a horizontal and a vertical oriented Front
> >> Panel Design, and uploaded them to the Files area.
> >>
> >> They are my first attempts at panels, so please give suggestions
etc.
> >>
> >> I purposely omitted the "corner" drillholes because I am not sure
> >> exactly where they should go? Any help on this?
> >>
> >> JON
> >>
> >>
> >> --- In cgs_synth@yahoogroups.com, sasami@h... wrote:
> >> > I have considered doing a Frac-rack version of this PCB. If you
> >guys put
> >> > your heads together and come up with a panel layout that is
> >> suitable, you
> >> > may even get the pots mounted on the PCB edge. Pots in a single
> >virtical
> >> > line, please.
> >> >
> >> > Ken
> >> >
> >> > >I had the same issue, with CGS35 and fracrack because they are
> >> > >so dissimilar in size/shape.
> >> > >
> >> > >I ended up putting the long/skinny board on perf and mounting
> >> > >the perf to the fracrack. I have some other mods as well
> >> > >but the basic idea is here:
> >> > >
> >> > >http://www.charlielamm.com/synth/steiner/index.php
> >> > >
> >> > >You can see photos of how I built it towards the bottom of the
page.
> >> > >
> >> > >I can't speak for the exact front panel design though since my
> >unit has
> >> > >some mods that yours probably won't. However, you could probably
> >> get away
> >> > >with a 2u fracrack with four knobs: freq, Q, and 2 mod pots. Jack
> >> wise,
> >> > >use 3 inputs and one output, along with 2 mod inputs, so 4 knobs
> >and 6
> >> > >1/8" jacks. That would fit pretty well on 2u fracrack panel,
> >although
> >> > >assembly might be easier with a 3u one.
> >> > >
> >> > >
> >> > >--CL
> >> > >
> >> > >
> >> > >On Mon, 30 May 2005, flatsix01 wrote:
> >> > >
> >> > >> Just finished populating the CGS35 VCF board and I am wondering
> >> if any
> >> > >> FracRack sized front panel designs are floating around for this
> >> board?
> >> > >>
> >> > >> If not, any suggestions on 'ideal arrangement' of pots/jacks?
> >> > >>
> >> > >> Thanks!
> >> > >> JON
> >> > >>
> >> > >>
> >> > >>
> >> > >>
> >> > >>
> >> > >> See the following URLS for the CGS Modular Synth home page:
> >> > >> Main: http://www.cgs.synth.net/
> >> > >> Secondary: http://otherunicorn.0catch.com/synth/
> >> > >> Yahoo! Groups Links
> >> > >>
> >> > >>
> >> > >>
> >> > >>
> >> > >>
> >> > >>
> >> > >
> >> > >
> >> > >
> >> > >
> >> > >See the following URLS for the CGS Modular Synth home page:
> >> > >Main: http://www.cgs.synth.net/
> >> > >Secondary: http://otherunicorn.0catch.com/synth/
> >> > >Yahoo! Groups Links
> >> > >
> >> > >
> >> > >
> >> > >
> >> > >
> >> > >
> >> > >
> >> >
> >_______________________________________________________________________
> >> > Ken Stone sasami@h... or sasami@c...
> >> > Modular Synth PCBs for sale
<http://www.blaze.net.au/~sasami/synth/>
> >> > Australian Miniature Horses & Ponies
> ><http://www.blaze.net.au/~sasami/>
> >
> >
> >
> >
> >
> >
> >See the following URLS for the CGS Modular Synth home page:
> >Main: http://www.cgs.synth.net/
> >Secondary: http://otherunicorn.0catch.com/synth/
> >Yahoo! Groups Links
> >
> >
> >
> >
> >
> >
> >
> >
> _______________________________________________________________________
> Ken Stone sasami@h... or sasami@c...
> Modular Synth PCBs for sale <http://www.blaze.net.au/~sasami/synth/>
> Australian Miniature Horses & Ponies <http://www.blaze.net.au/~sasami/>