Cgs synth

Too many things to do, not enought time to do it, and my software was on a
HD that died, as I discovered when I tried to open the fpd..... so sorry,
nothing yet.

Ken

>So any feedback on this?
>
>I am anxious to send it out for fabrication :)
>
>JON
>
>
>
>--- In cgs_synth@yahoogroups.com, "flatsix01" <flatsix01@y...> wrote:
>> OK - I have created both a horizontal and a vertical oriented Front
>> Panel Design, and uploaded them to the Files area.
>>
>> They are my first attempts at panels, so please give suggestions etc.
>>
>> I purposely omitted the "corner" drillholes because I am not sure
>> exactly where they should go? Any help on this?
>>
>> JON
>>
>>
>> --- In cgs_synth@yahoogroups.com, sasami@h... wrote:
>> > I have considered doing a Frac-rack version of this PCB. If you
>guys put
>> > your heads together and come up with a panel layout that is
>> suitable, you
>> > may even get the pots mounted on the PCB edge. Pots in a single
>virtical
>> > line, please.
>> >
>> > Ken
>> >
>> > >I had the same issue, with CGS35 and fracrack because they are
>> > >so dissimilar in size/shape.
>> > >
>> > >I ended up putting the long/skinny board on perf and mounting
>> > >the perf to the fracrack. I have some other mods as well
>> > >but the basic idea is here:
>> > >
>> > >http://www.charlielamm.com/synth/steiner/index.php
>> > >
>> > >You can see photos of how I built it towards the bottom of the page.
>> > >
>> > >I can't speak for the exact front panel design though since my
>unit has
>> > >some mods that yours probably won't. However, you could probably
>> get away
>> > >with a 2u fracrack with four knobs: freq, Q, and 2 mod pots. Jack
>> wise,
>> > >use 3 inputs and one output, along with 2 mod inputs, so 4 knobs
>and 6
>> > >1/8" jacks. That would fit pretty well on 2u fracrack panel,
>although
>> > >assembly might be easier with a 3u one.
>> > >
>> > >
>> > >--CL
>> > >
>> > >
>> > >On Mon, 30 May 2005, flatsix01 wrote:
>> > >
>> > >> Just finished populating the CGS35 VCF board and I am wondering
>> if any
>> > >> FracRack sized front panel designs are floating around for this
>> board?
>> > >>
>> > >> If not, any suggestions on 'ideal arrangement' of pots/jacks?
>> > >>
>> > >> Thanks!
>> > >> JON
>> > >>
>> > >>
>> > >>
>> > >>
>> > >>
>> > >> See the following URLS for the CGS Modular Synth home page:
>> > >> Main: http://www.cgs.synth.net/
>> > >> Secondary: http://otherunicorn.0catch.com/synth/
>> > >> Yahoo! Groups Links
>> > >>
>> > >>
>> > >>
>> > >>
>> > >>
>> > >>
>> > >
>> > >
>> > >
>> > >
>> > >See the following URLS for the CGS Modular Synth home page:
>> > >Main: http://www.cgs.synth.net/
>> > >Secondary: http://otherunicorn.0catch.com/synth/
>> > >Yahoo! Groups Links
>> > >
>> > >
>> > >
>> > >
>> > >
>> > >
>> > >
>> >
>_______________________________________________________________________
>> > Ken Stone sasami@h... or sasami@c...
>> > Modular Synth PCBs for sale <http://www.blaze.net.au/~sasami/synth/>
>> > Australian Miniature Horses & Ponies
><http://www.blaze.net.au/~sasami/>
>
>
>
>
>
>
>See the following URLS for the CGS Modular Synth home page:
>Main: http://www.cgs.synth.net/
>Secondary: http://otherunicorn.0catch.com/synth/
>Yahoo! Groups Links
>
>
>
>
>
>
>
>

_______________________________________________________________________
Ken Stone sasami@... or sasami@...
Modular Synth PCBs for sale <http://www.blaze.net.au/~sasami/synth/>
Australian Miniature Horses & Ponies <http://www.blaze.net.au/~sasami/>