Hey, what is the file called? I don't see it..
JON
JON
--- In cgs_synth@yahoogroups.com, "supisuzoi" <son_of_zoggs@c...> wrote:
> I just upped a photo of my newly-finished, Frac-sized Bionic Filter.
Yup, had to rename it,
> too... I have an aversion to ticks. Anyhow, it's an FPE design,
matching with the rest of my
> synth.
>
> Soggy
>
>
>
> --- In cgs_synth@yahoogroups.com, "flatsix01" <flatsix01@y...> wrote:
> > So any feedback on this?
> >
> > I am anxious to send it out for fabrication :)
> >
> > JON
> >
> >
> >
> > --- In cgs_synth@yahoogroups.com, "flatsix01" <flatsix01@y...> wrote:
> > > OK - I have created both a horizontal and a vertical oriented Front
> > > Panel Design, and uploaded them to the Files area.
> > >
> > > They are my first attempts at panels, so please give suggestions
etc.
> > >
> > > I purposely omitted the "corner" drillholes because I am not sure
> > > exactly where they should go? Any help on this?
> > >
> > > JON
> > >
> > >
> > > --- In cgs_synth@yahoogroups.com, sasami@h... wrote:
> > > > I have considered doing a Frac-rack version of this PCB. If you
> > guys put
> > > > your heads together and come up with a panel layout that is
> > > suitable, you
> > > > may even get the pots mounted on the PCB edge. Pots in a single
> > virtical
> > > > line, please.
> > > >
> > > > Ken
> > > >
> > > > >I had the same issue, with CGS35 and fracrack because they are
> > > > >so dissimilar in size/shape.
> > > > >
> > > > >I ended up putting the long/skinny board on perf and mounting
> > > > >the perf to the fracrack. I have some other mods as well
> > > > >but the basic idea is here:
> > > > >
> > > > >http://www.charlielamm.com/synth/steiner/index.php
> > > > >
> > > > >You can see photos of how I built it towards the bottom of
the page.
> > > > >
> > > > >I can't speak for the exact front panel design though since my
> > unit has
> > > > >some mods that yours probably won't. However, you could probably
> > > get away
> > > > >with a 2u fracrack with four knobs: freq, Q, and 2 mod pots.
Jack
> > > wise,
> > > > >use 3 inputs and one output, along with 2 mod inputs, so 4 knobs
> > and 6
> > > > >1/8" jacks. That would fit pretty well on 2u fracrack panel,
> > although
> > > > >assembly might be easier with a 3u one.
> > > > >
> > > > >
> > > > >--CL
> > > > >
> > > > >
> > > > >On Mon, 30 May 2005, flatsix01 wrote:
> > > > >
> > > > >> Just finished populating the CGS35 VCF board and I am wondering
> > > if any
> > > > >> FracRack sized front panel designs are floating around for this
> > > board?
> > > > >>
> > > > >> If not, any suggestions on 'ideal arrangement' of pots/jacks?
> > > > >>
> > > > >> Thanks!
> > > > >> JON