There is no bug fix on the Burst Generator. The jumpers in the photo are
connecting the unassigned LED to the selected output.
Most likely you have a construction error - a solder bridge, bad joint or
whatever.
Ken
Ken Stone sasami@...
Modular Synth PCBs for sale <http://www.blaze.net.au/~sasami/synth/>
Australian Miniature Horses & Ponies <http://www.blaze.net.au/~sasami/>
connecting the unassigned LED to the selected output.
Most likely you have a construction error - a solder bridge, bad joint or
whatever.
Ken
>Hello All -_______________________________________________________________________
>
>I just finished the BG hooked it up and no joy. Looking at the
>docs, there appears to be two jumpers (bug fixes) on the back of the
>board. I didn't see this documented but I suspect that I need to do
>this.
>
>I get an oscilloscope on Monday so I can check the output then.
>
>Mike
Ken Stone sasami@...
Modular Synth PCBs for sale <http://www.blaze.net.au/~sasami/synth/>
Australian Miniature Horses & Ponies <http://www.blaze.net.au/~sasami/>