There are probably 1 extra of 10k and 100k because mys software deosn't know
the difference between a trimmer and a resistor, and I failed to notice it
while putting the parts list together. 100n -yes, there are 8.
No 10p either.
The PCB is correct.
Ken
Ken Stone sasami@... or sasami@...
Modular Synth PCBs for sale <http://www.blaze.net.au/~sasami/synth/>
Australian Miniature Horses & Ponies <http://www.blaze.net.au/~sasami/>
the difference between a trimmer and a resistor, and I failed to notice it
while putting the parts list together. 100n -yes, there are 8.
No 10p either.
The PCB is correct.
Ken
>Hi._______________________________________________________________________
>Fisrt: what is a 0,156 4 pin connector?
>...after series of double checks I can be sure that there are not 14
>(but 13) marked 10K resistors,not 9 (but 8)100n, (and 10pF is not even
>printed) on my Bi-N-Tic PCB...Am I right, or does this overlay have a
>missprint?
>
>
>
>
>
>The CGS Modular Synth home page: http://www.cgs.synth.net/
>
>Yahoo! Groups Links
>
>
>
>
>
>
>
Ken Stone sasami@... or sasami@...
Modular Synth PCBs for sale <http://www.blaze.net.au/~sasami/synth/>
Australian Miniature Horses & Ponies <http://www.blaze.net.au/~sasami/>