Cgs synth

UPS! of course, I meant the Divider not a Frequency Shifter. Sorry.
There is no Frequency Shifter in this synth.

The JAG: I have two Blacet Mixer-Processors, one for each JAG-Input.
Each Mixer has 3 Inputs, one is hardwired to a Joystick-Out, the
other two to LFO 2 (3) and to a EG 1 (2). Those you can break up to
use other LFO's or EG's or any CV or audio stuff :-)

--- In cgs_synth@yahoogroups.com, Dennis Verschoor <modular@g...>
wrote:

> Hi Oliver
>
> I gues you ment a Blacet Frequency Divider.
> Can you tell me more how you patched the JAG and mix it?
>
> Regards,
>
> Dennis
>
> On 8/20/05, waveform100 <googol@g...> wrote:
> > Thanks Richard! You're right: It was the hardest choosing the
> > modules. This took several month. But some of the modules I had
> > already and always knew that those have to be in (for example:
> > Sawtooth Animator, JAG, MiniWave, Frequency Shifter from Blacet,
> > RealRing, Wave Multiplier and the two Mixer-Processors for the

Vector-

> > Heart (its possible to mix in LFO's and EG's next to the Joystick

for

> > the JAG without patching). At the moment, I don't have a picture
> > straight on, but I have another hi-res from the right. Together

with

> > that from the left you can see almost everything. I WILL make more
> > pictures, but this may take some time, because its in the studio

now.

> >
> > Do you recognise the Sawtooth Animator? There I did the little mod
> > you suggested :-).
> >
> > I'll post a list of all the modules next week with the picture.

Am in

> > a hurry...
> >
> >
> >
> > --- In cgs_synth@yahoogroups.com, Richard Brewster <pugix@e...>

wrote:

> > > What a great looking synth! I'm always impressed when someone
> > takes the
> > > time to make a complete synth in a single panel, deciding what

all

> > the
> > > modules will be. You used very nice design principles for the
> > > large/small knobs, lending a wonderful consistency across these
> > diverse
> > > modules. It is modular in the patching sense, but not the

physical

> > > sense. I'd like to know more about this Auralesque. Do you

have a

> > > straight-on photo? A list of the modules?
> > >
> > > -Richard Brewster
> > >
> > > waveform100 wrote:
> > >
> > > >oh! ... there it is, sharp, in the upper left of the picture:
> > > >
> > > >http://www.sequencer.de/pix/auralesque/Auralesque.jpg
> > > >
> > > >As this is a Half-Modular Synth, I had to find out how to get

the

> > > >most out of the module without having to patch it. After a long
> > test
> > > >(on a wooden faceplate), I had the impression, that I will use

for

> > > >the Sqr-Inputs:
> > > >A) Output from a Divider (Blacet), this one has a Output-

Attenuator

> > > >B) Sine from the same VCO
> > > >C): Off (Middle-Position of the Switch)
> > > >
> > > >For the Triangle-Inputs I added a extra input-Attenuator:
> > > >A) Triangle (from the same VCO)
> > > >B) Sine (from the same VCO)
> > > >No Off (Input Attenuator)
> > > >
> > > >I use the Grinder separately: It has nothing to do with the
> > Folder
> > > >Section. I can use it to shape the Triangle of another VCO OR

(as

> > the
> > > >Grinder is NICE for complex Inputs): I can switch the whole
> > Grinder
> > > >to another position between two Filters. With just one 4-

Switch.

> > > >
> > > >BTW: The Ringmodulator in the same Picture is the Real-Ring. I
> > love
> > > >it, but it loads the inputs, I already mentionned that here.
> > > >
> > > >cheers!
> > > >Olivier
> > > >
> > > >
> > > >
> > > >
> >
> >
> >
> >
> >
> > The CGS Modular Synth home page: http://www.cgs.synth.net/
> >
> > Yahoo! Groups Links
> >
> >
> >
> >
> >
> >
> >
>
>
> --
> --------------------------------------------------------------------

--------------

> - Gear pictures at: http://jx.riscy.net/gallery/albums.php -
> -

> -
> - Music at: http://www.soundclick.com/trestrois -
> --------------------------------------------------------------------

--------------