Cgs synth

All of the hardware came from Digi-Key. I bought the epoxy at a local
hardware store.

--Adam

> -----Original Message-----
> From: brownchonald [mailto:chonald@...]
> Sent: Tuesday, November 01, 2005 12:48 PM
> To: cgs_synth@yahoogroups.com
> Subject: [cgs_synth] Re: CGS VCOs and mounting dimensions?
>
> Adam, where do you get these threaded stand offs, Liquid Steel epoxy,
> nuts and screws?
>
> I'm very interested. This might be a solution to my problem.
>
> Cole
>
> --- In cgs_synth@yahoogroups.com, "Adam Schabtach" <adam@s...> wrote:
> >
> > I haven't done the VCO, but the Ken Stone PCBs I have seen vary
> quite a bit
> > in size, so I don't think that one can make a general statement one
> way or
> > the other regarding their fit behind a 1U panel.
> >
> > FWIW, I like mounting my PCBs on threaded standoffs attached to the
> rear of
> > the panel with Liquid Steel epoxy. See my website,
> www.studionebula.com, for
> > photos of a CGS Digital Noise, Wave Multiplier, and Steiner filter
> built in
> > this manner.
> >
> > --Adam
> >
> > > -----Original Message-----
> > > From: brownchonald [mailto:chonald@g...]
> > > Sent: Monday, October 31, 2005 8:58 PM
> > > To: cgs_synth@yahoogroups.com
> > > Subject: [cgs_synth] CGS VCOs and mounting dimensions?
> > >
> > > Will a Ken Stone PCB fit flat, behind a MOTM 1U panel?
> > >
> > > I'm just wondering, because I'm figuring out how I will mount the VCO
> > > PCB that I'm working on.
> > >
> > > Thanks,
> > > Cole
> > >
> > >
> > >
> > >
> > >
> > >
> > > The CGS Modular Synth home page: http://www.cgs.synth.net/
> > >
> > > Yahoo! Groups Links
> > >
> > >
> > >
> > >
> > >
> > >
> > >
> > >
> >
>
>
>
>
>
>
>
> The CGS Modular Synth home page: http://www.cgs.synth.net/
>
> Yahoo! Groups Links
>
>
>
>
>
>
>
>