Elby Designs sells the Tempco and also a Bi-N-Tic filter special parts kit:
http://www.elby-designs.com/
The 2n2 cap is Mouser 23PS222
http://www.mouser.com/
You would not notice much difference with a 10R resistor. The bead
helps filter out RF. If your neighbor is a ham or a CB radio operator,
you might want beads.
-Richard Brewster
boward_k wrote:
http://www.elby-designs.com/
The 2n2 cap is Mouser 23PS222
http://www.mouser.com/
You would not notice much difference with a 10R resistor. The bead
helps filter out RF. If your neighbor is a ham or a CB radio operator,
you might want beads.
-Richard Brewster
boward_k wrote:
>..Bi-n-tic soon finished!
>just cant find: 2n2 styrene, 1k PT146 tempco...Where can I buy them?
>
>and also: should I connect the short leg of the LED to LA in the Saw
>Pitch Shifter/Wave Multiplier?..and where should I connect the other
>longer leg of the LED?
>
>and what would be the difference in between using ferrite bead to 10R
>resistors?
>
>Regards/Boward
>
>
>
>
>
>
>The CGS Modular Synth home page: http://www.cgs.synth.net/
>
>Yahoo! Groups Links
>
>
>
>
>
>
>
>
>
>