Cgs synth

>I'm not totally sure on the trimmers. well, I'm just not sure what
>footprint is used in Ken's PCBs. It seems that it can handle some
>different sizes. So, I'm fairly certain this one will work: 652-3306F-1-204
>note, you can probably use a a 250K trim pot which may be more common.

200k, 220k, 250k all fine. It depends on where in the world and when that
these variations are used.

As for the footprint, by boards usually accept several footprints, as long
as the outer pins are 0.2" (5mm) apart.

Ken
_______________________________________________________________________
Ken Stone sasami@... or sasami@...
Modular Synth PCBs for sale <http://www.blaze.net.au/~sasami/synth/>
Australian Miniature Horses & Ponies <http://www.blaze.net.au/~sasami/>