Look at the stomp-box adapters. These are for synth to line-level
conversion. I'd go 20 to 1. i.e. feed the signal in to a 22k resistor which
is in series with a 1k resistor, the other end of wchi is grounded. Take
your line-level from the junction of the two resistors.
Ken
Ken Stone sasami@... or sasami@...
Modular Synth PCBs for sale <http://www.blaze.net.au/~sasami/synth/>
Australian Miniature Horses & Ponies <http://www.blaze.net.au/~sasami/>
conversion. I'd go 20 to 1. i.e. feed the signal in to a 22k resistor which
is in series with a 1k resistor, the other end of wchi is grounded. Take
your line-level from the junction of the two resistors.
Ken
>Hey, what is the max audio voltages for mixers, amplifiers and home_______________________________________________________________________
>stereos. I have the Ken Stone VCO of which i just built and the square
>wave output generates a voltage that is about 12-15 Vpk-pk. I'm scared
>to run this into any of my other audio gear with out an attenuator or
>some sort. Should i be scared? I guess a better question is should my
>VCO generate 15Vpk-pk on the squareware output. Looking at the
>schematic it's just a simple comparator so i guess it should shot off
>to the upper/lower voltage rails.
>Josh
>
>
>
>
>
>
>The CGS Modular Synth home page: http://www.cgs.synth.net/
>
>Yahoo! Groups Links
>
>
>
>
>
>
>
Ken Stone sasami@... or sasami@...
Modular Synth PCBs for sale <http://www.blaze.net.au/~sasami/synth/>
Australian Miniature Horses & Ponies <http://www.blaze.net.au/~sasami/>