Cgs synth

> Hey, what is the max audio voltages for mixers, amplifiers and home
> stereos. I have the Ken Stone VCO of which i just built and the square
> wave output generates a voltage that is about 12-15 Vpk-pk. I'm scared
> to run this into any of my other audio gear with out an attenuator or
> some sort. Should i be scared? I guess a better question is should my
> VCO generate 15Vpk-pk on the squareware output. Looking at the
> schematic it's just a simple comparator so i guess it should shot off
> to the upper/lower voltage rails.
> Josh

On 1/10/06, Tom Adam <tom.adam@...> wrote:
>
> Don't connect to any sort of line-in level device thingie....
> I build a very small attenuator (2 jacks, one pot) to go back to line
> levels.
>
> I'm not sure if 15Vpk-pk is normal. check resistor values...
> I've got a MOTM VCO that gives 10Vpk-pk....
>
> Cheers,
> ToAd
>
> josh wrote:
>
> > Hey, what is the max audio voltages for mixers, amplifiers and home
> > stereos. I have the Ken Stone VCO of which i just built and the square
> > wave output generates a voltage that is about 12-15 Vpk-pk. I'm scared
> > to run this into any of my other audio gear with out an attenuator or
> > some sort. Should i be scared? I guess a better question is should my
> > VCO generate 15Vpk-pk on the squareware output. Looking at the
> > schematic it's just a simple comparator so i guess it should shot off
> > to the upper/lower voltage rails.
> > Josh
>
>
> --
> Tom Adam
> The Big Ear
> http://users.pandora.be/the-big-ear/
> Check out the download section!
>
>
>
> The CGS Modular Synth home page: http://www.cgs.synth.net/
>
>
>
> ------------------------------
> YAHOO! GROUPS LINKS
>
>
> - Visit your group "cgs_synth<http://groups.yahoo.com/group/cgs_synth>"
> on the web.
>
> - To unsubscribe from this group, send an email to:
> cgs_synth-unsubscribe@yahoogroups.com<cgs_synth-unsubscribe@yahoogroups.com?subject=Unsubscribe>
>
> - Your use of Yahoo! Groups is subject to the Yahoo! Terms of
> Service <http://docs.yahoo.com/info/terms/>.
>
>
> ------------------------------
>


[Non-text portions of this message have been removed]

>Hey, what is the max audio voltages for mixers, amplifiers and home
>stereos. I have the Ken Stone VCO of which i just built and the square
>wave output generates a voltage that is about 12-15 Vpk-pk. I'm scared
>to run this into any of my other audio gear with out an attenuator or
>some sort. Should i be scared? I guess a better question is should my
>VCO generate 15Vpk-pk on the squareware output. Looking at the
>schematic it's just a simple comparator so i guess it should shot off
>to the upper/lower voltage rails.
>Josh
>
>
>
>
>
>
>The CGS Modular Synth home page: http://www.cgs.synth.net/
>
>Yahoo! Groups Links
>
>
>
>
>
>
>

On 1/10/06, sasami@... <sasami@...> wrote:
>
> Look at the stomp-box adapters. These are for synth to line-level
> conversion. I'd go 20 to 1. i.e. feed the signal in to a 22k resistor
> which
> is in series with a 1k resistor, the other end of wchi is grounded. Take
> your line-level from the junction of the two resistors.
>
> Ken
>
> >Hey, what is the max audio voltages for mixers, amplifiers and home
> >stereos. I have the Ken Stone VCO of which i just built and the square
> >wave output generates a voltage that is about 12-15 Vpk-pk. I'm scared
> >to run this into any of my other audio gear with out an attenuator or
> >some sort. Should i be scared? I guess a better question is should my
> >VCO generate 15Vpk-pk on the squareware output. Looking at the
> >schematic it's just a simple comparator so i guess it should shot off
> >to the upper/lower voltage rails.
> >Josh
> >
> >
> >
> >
> >
> >
> >The CGS Modular Synth home page: http://www.cgs.synth.net/
> >
> >Yahoo! Groups Links
> >
> >
> >
> >
> >
> >
> >
> _______________________________________________________________________
> Ken Stone sasami@... or sasami@...
> Modular Synth PCBs for sale <http://www.blaze.net.au/~sasami/synth/<http://www.blaze.net.au/%7Esasami/synth/>
> >
> Australian Miniature Horses & Ponies <http://www.blaze.net.au/~sasami/<http://www.blaze.net.au/%7Esasami/>
> >
>
>
>
> The CGS Modular Synth home page: http://www.cgs.synth.net/
>
>
>
> ------------------------------
> YAHOO! GROUPS LINKS
>
>
> - Visit your group "cgs_synth<http://groups.yahoo.com/group/cgs_synth>"
> on the web.
>
> - To unsubscribe from this group, send an email to:
> cgs_synth-unsubscribe@yahoogroups.com<cgs_synth-unsubscribe@yahoogroups.com?subject=Unsubscribe>
>
> - Your use of Yahoo! Groups is subject to the Yahoo! Terms of
> Service <http://docs.yahoo.com/info/terms/>.
>
>
> ------------------------------
>


[Non-text portions of this message have been removed]

>my o-scope might not be calibrated correctly... i have been thinking it
>reads voltages a bit high. It;s really old. Thanks for the post.
>Josh
>
>On 1/10/06, Tom Adam <tom.adam@...> wrote:
>>
>> Don't connect to any sort of line-in level device thingie....
>> I build a very small attenuator (2 jacks, one pot) to go back to line
>> levels.
>>
>> I'm not sure if 15Vpk-pk is normal. check resistor values...
>> I've got a MOTM VCO that gives 10Vpk-pk....
>>
>> Cheers,
>> ToAd
>>
>> josh wrote:
>>
>> > Hey, what is the max audio voltages for mixers, amplifiers and home
>> > stereos. I have the Ken Stone VCO of which i just built and the square
>> > wave output generates a voltage that is about 12-15 Vpk-pk. I'm scared
>> > to run this into any of my other audio gear with out an attenuator or
>> > some sort. Should i be scared? I guess a better question is should my
>> > VCO generate 15Vpk-pk on the squareware output. Looking at the
>> > schematic it's just a simple comparator so i guess it should shot off
>> > to the upper/lower voltage rails.
>> > Josh
>>
>>
>> --
>> Tom Adam
>> The Big Ear
>> http://users.pandora.be/the-big-ear/
>> Check out the download section!
>>
>>
>>
>> The CGS Modular Synth home page: http://www.cgs.synth.net/
>>
>>
>>
>> ------------------------------
>> YAHOO! GROUPS LINKS
>>
>>
>> - Visit your group "cgs_synth<http://groups.yahoo.com/group/cgs_synth>"
>> on the web.
>>
>> - To unsubscribe from this group, send an email to:
>>

>>
>> - Your use of Yahoo! Groups is subject to the Yahoo! Terms of
>> Service <http://docs.yahoo.com/info/terms/>.
>>
>>
>> ------------------------------
>>
>
>
>[Non-text portions of this message have been removed]
>
>
>
>The CGS Modular Synth home page: http://www.cgs.synth.net/
>
>Yahoo! Groups Links
>
>
>
>
>
>
>